Taf end of ball routine

[domlouis]

I have a problem on my taf where the ball falling in the centre trough does not initiate the end of ball/bonus sequence.
I tested the switches in the trough and they all seem to work properly and register the presence of a ball... any other suggestions?
Thanks
Dom

 

[Vimtoman]

That switch can bend and move posistion quite easily. I have the same issue with mine.
The trough switch is adjustable due to having a separate threaded piece of metal.
Readjusted does cure the problem but it may play up again.
Also Check your playfield angle.

 

[domlouis]

Yes, I played up with the wires and it cured the problem. Thank you.

 

[Vimtoman]

I think the speed the ball goes down that trough just bends the wire.
It would benefit having the switch type with the flat actuator.