T-Nuts

[Carl Spiby]

What is the standard thread T-Nut and base size that Williams used in their machines?

Thanks

 

[Pudsey pinball]

I think there's 2 types check pinball mania he has them there.

 

[replicas]

There are two common o especially used in Williams/Bally machines.
Let me know what you need , I should be able to sort you out with some.

 

[Carl Spiby]

Thanks both, its a half inch base if that helps any.

 

[pinballmania]

6-32 and 8-32. Most posts are 8-32 wpc era.

 

[replicas]

Thanks both, its a half inch base if that helps any.

How many you need Carl ?

 

[Carl Spiby]

Only need one as the thread has gone but would be nice to have a couple spare.

I'm also after a hex head machine screw with an external tooth washer (found on the outside holes of the drain metal guide) and a couple of regular wood screws.

They're not mission critical so I can pick-up whatever you have at John's.