- Joined
- Nov 26, 2011
- Messages
- 258
STTNG for sale. Overhauled last year as follows:
Playfield out and every mech reworked, cleaned, re-sleeved, tickled and sorted.
Top PF strip down.
Playfield in good condition.
NOS full plastics set.
Two ramps replaced with 2nd hand good replacements.
Full metal ramp protector set.
Two domed canon covers (thanks Poi!)
Cliffy on Neutral Zone.
New flipper bats.
Flipper rebuild.
Full rerubber.
Legs and gun re-powder coated in satin black.
Hinge bolts, hinges and other black bolts sprayed and lacquered.
Inside of cab and back box sanded back to wood and reprayed in satin black.
8” sub upgrade with volume control – feel the Warp!!
Metal parts tumbled, polished and buffed, including the playfield scoops and lockdown bar receiver.
New shop out stickers.
New leg bolts, new feet.
Looms cleaned.
Metal protector fitted to subway trough which is cracked in a few places – but nothing serious.
Scratch to one side of backbox – on Picard’s face.
Not an LED in sight!
No faults, everything works fine.
One trough board has the wires soldered directly to it and is then connected with choc-blocks to aid easy removal.
The subway divertors have been rewelded at some point in their life but work fine.
£2150 or would consider a trade with cash either way for a NGG or WHYG?
Loads of hi res pics here: http://s1140.photobucket.com/user/e...=3&page=0&_suid=13821837049060900519979013696
Based in Brighouse, West Yorkshire.
Martin
Playfield out and every mech reworked, cleaned, re-sleeved, tickled and sorted.
Top PF strip down.
Playfield in good condition.
NOS full plastics set.
Two ramps replaced with 2nd hand good replacements.
Full metal ramp protector set.
Two domed canon covers (thanks Poi!)
Cliffy on Neutral Zone.
New flipper bats.
Flipper rebuild.
Full rerubber.
Legs and gun re-powder coated in satin black.
Hinge bolts, hinges and other black bolts sprayed and lacquered.
Inside of cab and back box sanded back to wood and reprayed in satin black.
8” sub upgrade with volume control – feel the Warp!!
Metal parts tumbled, polished and buffed, including the playfield scoops and lockdown bar receiver.
New shop out stickers.
New leg bolts, new feet.
Looms cleaned.
Metal protector fitted to subway trough which is cracked in a few places – but nothing serious.
Scratch to one side of backbox – on Picard’s face.
Not an LED in sight!
No faults, everything works fine.
One trough board has the wires soldered directly to it and is then connected with choc-blocks to aid easy removal.
The subway divertors have been rewelded at some point in their life but work fine.
£2150 or would consider a trade with cash either way for a NGG or WHYG?
Loads of hi res pics here: http://s1140.photobucket.com/user/e...=3&page=0&_suid=13821837049060900519979013696
Based in Brighouse, West Yorkshire.
Martin
Last edited: