Decided my STTNG was too dirty and thought I'd strip it down or at least on the playfield side for a full clean down.
I've never done anything even close to this level of cleaning before, but it was a real improvement and not to mention learning curve.
In the end when I realised how tough a machine STTNG was, I went all in and cleaned bulb heads (which made a surprising improvement), inside lenses, outside lenses, every ramp, ramp cover, every figure and every wireform, even a slight tickle in the trough
Oh and the glass got some niggly little well stuck marks removed with a stanly blade.
I would have replaced rubbers but they are very good condition, just needed a wipe down.
Backglass Lift Trim & Top Trim ordered new to replace splitting originals.
Couple of bulbs to replace and it's 100% again.
Knowing how much brighter dusty bulbs became, I am seriously tempted to follow up with cleaning inserts from below playfield too.
Unfortunately there is a rather poor modern decal on the right hand side of the backbox, it is too tall compared to the original and a different finish to it, looks like back box had a b grade refurb at some point.
The cabinet side art is perfectly acceptable with minor knocks only.
All in all I am very happy with the machine as drop holes barely have any wear and I think it's pretty much original.
I've never done anything even close to this level of cleaning before, but it was a real improvement and not to mention learning curve.
In the end when I realised how tough a machine STTNG was, I went all in and cleaned bulb heads (which made a surprising improvement), inside lenses, outside lenses, every ramp, ramp cover, every figure and every wireform, even a slight tickle in the trough

Oh and the glass got some niggly little well stuck marks removed with a stanly blade.
I would have replaced rubbers but they are very good condition, just needed a wipe down.
Backglass Lift Trim & Top Trim ordered new to replace splitting originals.
Couple of bulbs to replace and it's 100% again.
Knowing how much brighter dusty bulbs became, I am seriously tempted to follow up with cleaning inserts from below playfield too.
Unfortunately there is a rather poor modern decal on the right hand side of the backbox, it is too tall compared to the original and a different finish to it, looks like back box had a b grade refurb at some point.
The cabinet side art is perfectly acceptable with minor knocks only.
All in all I am very happy with the machine as drop holes barely have any wear and I think it's pretty much original.
Attachments
-
20220620_112127.jpg115.2 KB · Views: 140
-
20220620_110721.jpg86.9 KB · Views: 136
-
20220620_110745.jpg88.3 KB · Views: 132
-
20220620_110809.jpg185.7 KB · Views: 131
-
20220620_110822.jpg184 KB · Views: 124
-
20220620_110835.jpg154.7 KB · Views: 123
-
20220620_111312.jpg117.9 KB · Views: 122
-
20220620_111341.jpg109.8 KB · Views: 119
-
20220620_111409.jpg106.2 KB · Views: 124
-
20220620_111746.jpg54.9 KB · Views: 124
-
20220620_111948.jpg59.2 KB · Views: 121
-
20220620_112001.jpg84.6 KB · Views: 110
-
20220620_110644.jpg68.5 KB · Views: 105
-
20220620_110627.jpg85.7 KB · Views: 104
-
20220620_110612.jpg141.2 KB · Views: 104
-
20220620_105623.jpg136.1 KB · Views: 108
-
20220620_105731.jpg159.4 KB · Views: 104
-
20220620_105748.jpg97.8 KB · Views: 99
-
20220620_105802.jpg106 KB · Views: 95
-
20220620_105815.jpg143.2 KB · Views: 92
-
20220620_105915.jpg94.7 KB · Views: 87
-
20220620_110106.jpg76.2 KB · Views: 84
-
20220620_110558.jpg175.2 KB · Views: 80
-
20220620_110529.jpg139.9 KB · Views: 78
-
20220620_110411.jpg62.2 KB · Views: 81
-
20220620_110300.jpg70.3 KB · Views: 81
-
20220620_110213.jpg72.6 KB · Views: 142
Last edited: