Sttng

[Pudsey pinball]

Hi anyone got a pair of decent sling plastics for sttng also looking for a wpc driver board in working order.

 

[stoptap]

You got it to boot yet Dave ?

 

[Pudsey pinball]

No !! Now it blows fuses think I need to totally start again

 

[stoptap]

Sounds like you need to start from the bottom with the voltages. Then the usual stuff like shorts to ground etc.



Good luck. Let me know if there is anything else I can do for you.

 

[Pudsey pinball]

Thanks dude ,will do thanks for the rom think I've made it worse somewhere along the line

 

[stoptap]

Check with the manual that all the connectors are on the right headers. I've had that problem before with a newly acquired pin. I had to check the colours of the wires to nail it.