Sttng GI

[Pudsey pinball]

Hi all my GI on my sttng was all connected wrong now that I've put it back as per the wiring diagrams in manual it doesn't work correctly,at end of game it all doesn't go out when flashers come on ,any one send me a pick or right info on hoist all goes?

 

[replicas]

Not more problems Dave.

You certainly have had your fare share with that one.

 

[Pudsey pinball]

I've got it ready to go for our show mate just this last niggle to sort ,then all tiny bits can wait

 

[pinballmania]

If its not going off then I would suspect a dodgy data cable from CPU or reseat ASIC on CPU. From left to right the wiring on gi connectors should be v/w g/w y/w o/w b/w v g key o b. the two connectors are in parallel do not all positions may be filled on each connector.

 

[Pudsey pinball]

That's on j120 and j121 that's where it's not right?

 

[Paul]

Andy replied with ...

Yes. Standard wiring for j120 and j121

Only he did a reply to the mail - which ended up in my inbox

 

[pinballmania]

Could notifications be sent from a noreply email address to prevent idiots like me doing this?

 

[Paul]

Good thinking Andy - Working on it now