Found it! Spinner 515-5236-00 (Replaced by A-3460) Early Data East Robocop

[Deleted member 5505]

The arm has snapped in the middle of mine not seeing anything in the UK ??

According to Marco listing 515-5236-00 was replaced by A-3460 both are out of stock.

Would try a Williams too if they're rocking horse poo, looks similar enough:

Cheers

 

[Asiapinball]

If it is same as used on baywatch I have one. Check the baywatch manual for part number and let me know.

 

[kevin_smith]

The arm has snapped in the middle of mine not seeing anything in the UK ??

According to Marco listing 515-5236-00 was replaced by A-3460 both are out of stock.

Would try a Williams too if they're rocking horse poo, looks similar enough:

View attachment 237784 View attachment 237787
Cheers

The same happened to the "Super Spinner" on my Data East Secret Service which I think is the same part. I drew a blank searching online. I'd also like to find a replacement.

Kevin

 

[Deleted member 5505]

If it is same as used on baywatch I have one. Check the baywatch manual for part number and let me know.

Unfortunately this looks like 515-5553-00, which has an additional angle present.

 

[Asiapinball]

I think you are right. It would also be quite difficult to extract from its mounting too as it is crimped at the end. Shame - good luck with the search.

 

[Deleted member 5505]

The same happened to the "Super Spinner" on my Data East Secret Service which I think is the same part. I drew a blank searching online. I'd also like to find a replacement.

Kevin

Mate, I think this is the correct one for our games.
https://pinball-parts.shop/en/detail/index/sArticle/28936#
The courier fee is almost 20 eur, do you want me to add another for you if I order?

EDIT - Looks like pinballshop.nl also has them too cheers @Highlnder00

 

[Deleted member 5505]

@kevin_smith I've ordered a spare, if it fits in my Robocop I'll let you know
I think it's a case of essentially the exact same part having various serial numbers over the years and multiple pinball manufacturer references

 

[kevin_smith]

Thanks for the offer. I would have had one. Sorry I was too late getting back. Let me know how you get on...

 

[Deleted member 5505]

Thanks for the offer. I would have had one. Sorry I was too late getting back. Let me know how you get on...

No worries, as I've said I bought an extra so if it works I can send the spare your way.

 

[Deleted member 5505]

Arrived shockingly quickly, Robocop working again.
@kevin_smith pm me your address if you want the spare mate, the arms are a mm or two shorter by comparison.