Very nice SpiderMan pin.
Since owning this I’ve added protectors, replaced broken Sandman plastic & added protector underneath, changed coloured GI lamps for white comets, added speaker lights & plastics, fitted Doc Oc cliffy, changed flashers for LED flashers, added magnet Mylar to preserve that area and fitted new coil stops.
Also replaced the blue rubber bumpers under Doc Oc & Sandman as these were quite worn.
All LED’s other then the white inserts that use fading effects.
Has colour dmd (came with LCD but will be LED ColourDMD).
Has shaker motor too.
Has mirror blades (quite a few scratches but certainly don’t notice these when playing)
A few marks on cabinet - 2 bigger dings both pictured.
Great condition playfield, no wear around Doc Oc magnet
Sandbank, Doc Oc & Sand Man mechs have been stripped, cleaned & re-greased.
No broken plastic & plays beautifully.
I started a thread in the help section as occasionally, Doc Oc or the Sandbank would lower, raise, then lower again when they were triggered to just lower. After lots of problem solving and changing opto’s, switch’s & diodes I concluded this is just something that occasionally happens - this was driven by watching lots of YouTube videos of SM gameplay and actually playing 2 other SM pins and as of yet Ive failed to find one that doesn’t behave in the same way!
This is something minor that doesn’t affect gameplay but did upset my OCD for a while
£4750 please
Since owning this I’ve added protectors, replaced broken Sandman plastic & added protector underneath, changed coloured GI lamps for white comets, added speaker lights & plastics, fitted Doc Oc cliffy, changed flashers for LED flashers, added magnet Mylar to preserve that area and fitted new coil stops.
Also replaced the blue rubber bumpers under Doc Oc & Sandman as these were quite worn.
All LED’s other then the white inserts that use fading effects.
Has colour dmd (came with LCD but will be LED ColourDMD).
Has shaker motor too.
Has mirror blades (quite a few scratches but certainly don’t notice these when playing)
A few marks on cabinet - 2 bigger dings both pictured.
Great condition playfield, no wear around Doc Oc magnet
Sandbank, Doc Oc & Sand Man mechs have been stripped, cleaned & re-greased.
No broken plastic & plays beautifully.
I started a thread in the help section as occasionally, Doc Oc or the Sandbank would lower, raise, then lower again when they were triggered to just lower. After lots of problem solving and changing opto’s, switch’s & diodes I concluded this is just something that occasionally happens - this was driven by watching lots of YouTube videos of SM gameplay and actually playing 2 other SM pins and as of yet Ive failed to find one that doesn’t behave in the same way!
This is something minor that doesn’t affect gameplay but did upset my OCD for a while
£4750 please
Last edited:
