Soldering Iron and solder

[Buddinblack]

So newbie question I know but I’m looking for recommendations on a soldering iron and solder.

Has anyone bought any from Amazon that was particular good?

Thanks in advance

Alan [emoji1303]


Sent from my iPhone using Tapatalk

 

[Slimetime]

Have a look here at a previous thread on the subject.

https://www.pinballinfo.com/communi...any-recommendations-please.47977/#post-379871

 

[Fubar]

And this one: https://www.pinballinfo.com/community/threads/soldering-iron.45629/

Personally if it's just for pinball-related work I'd get a TS100 as you can power it from a battery which is super convenient when mucking around a playfield.

Otherwise get some known brand like Weller or Hakko. At least 50W.

Edit: you also asked about solder - any 60/40 tin/lead solder with rosin core will do.

 

[Buddinblack]

Thanks for the reply’s guys I’ve had a look through previous threads... Cheers [emoji1303]


Sent from my iPhone using Tapatalk

 

[Smraedis]

Should be said about the TS100, the tip it comes with isn't so great, the ones with flat ends work a lot better with it.
I had some bad experiences with the original tip!

 

[MadNat]

I’m a convert to the T-12 direct heat solder stations. Really nice bits of kit with a wide range of tips. Tons of config, and gets to optimum heat crazy fast.

Something like this: KSGER T12 V3.0 STM32 72W Soldering Iron Station Digital Temperature Controller Welder Rework Repairing Tool

KSGER T12 V3.0 STM32 72W Soldering Iron Station Digital Temperature Controller Welder Rework Repairing Tool: Amazon.co.uk: DIY & Tools

Shop KSGER T12 V3.0 STM32 72W Soldering Iron Station Digital Temperature Controller Welder Rework Repairing Tool. Free delivery on eligible orders of £20 or more.

www.amazon.co.uk

 

[C&C]

Thanks for the reply’s guys I’ve had a look through previous threads... Cheers [emoji1303]


Sent from my iPhone using Tapatalk

Only thing to add is regarding the solder, definitely 60/40 with rosin core.
Make sure you DO NOT get lead-free stuff as it needs a higher temperature to melt and is far more difficult to work with.

Example here although you can probably find it cheaper if you shop around.

 

[Deleted member 2463]

I use a usb one with a battery search for it