This one has me stumped.
I get AC voltage at the power board J102 (so the transformer output must be good)
Fuse is good, checked continuity throughout the circuit.
I have changed BR4 & C11
I get no voltage at TP7 (20V)
Thus no power for the flashers.
I have tried another board and get the same.
I get AC voltage at the power board J102 (so the transformer output must be good)
Fuse is good, checked continuity throughout the circuit.
I have changed BR4 & C11
I get no voltage at TP7 (20V)
Thus no power for the flashers.
I have tried another board and get the same.