For Sale Selling pinball parts

  • Hi Guest,

    Want lots of pinball Machines to play in one place??

    One low cost price to let you play all of these??

    If you Fancy visiting the BIGGEST and BEST Pinball show of 2019 Click Here

    (Click the "x" in the top right corner to get rid of this message :D )

arakissun

Registered
Feb 21, 2013
409
64
28
37
Popeye parts
Coil and bracket assy A-17251-10$
Kicker coil bracket assy A-17774-10$
Wheel assy with opto board and without motor and opto interupter plastic-18$

Road Show parts
Radio assy-18$
Dual diverter bracket & coil A-19049-28$
2xBridge Out assy including plastic,board,gate,switch,wires-2x24$

Surf 'n Safari parts
Driver board MA -1358-80$
Diode board MA -1448-5$
Resistor board MA -1418-5$
Resistor board MA -1698-7$
Resistor board MA -1699-5$
Resistor board MA -1710-7$
Sensor board MA -1334-15$
Auxiliary Sound board MA -1712-65$
Sound board MA -1629-110$
3xOptical Interface board MA -1558-3x10$
Billboard MA -1702-8$
Yellow ground strip-14$
Backbox boards hold wooden panel-20$
Playfield lights back panel-14$
Coinmechanism C220-17$
Transformer Panel MA -1694-45$
Transformer 27973-80$
Knocker assy-19$
Wire harness(from under playfield,upper boards,sockets and etc.)-30$
Translite-18$
Cabinet left+right rails+pivots-18$
Tilt mechanism assy-10$
Relay strip assy MA -1671-20$
"Start" button assy-8$
Switch On/Off assy-15$
2xCabinet butt hinges 26449-2x10$
Line filter assy MA -1386-18$
Lockdown mechanism-18$
Kicking target assy MA -1458-29$
Right one target assy-20$
Lamp boards-14$
2xSlingshots assy-2x15$
Ball shooter gauge+plastic-20$
Pop Bumper assy-17$
Speaker panel assy-37$
Ball release to shooter line assy-24 $

High Speed parts
Plastic ramp assy-15$
Traffic lights assy without the plastic house-2x4$
2xLock ball assy+metal plate+switch-2x7$
2xRelay assy+resistor board including capacitator-2x6$
2xResistor boards-2x5$

Phantom of the Opera parts
Apron-10$
2x3-Bank standup targets assy-2x10$
3xPop bumpers-3x15$
Outlet switch assy-7$

Playboy 35th ANNIVERSARY parts
Lockdown reciever-10$
Power switch box-14$
Backbox lights wooden panel assy-25$
Plastics-15$
Mansion Backwall plastic-10$
Left lock ball kicker-15$
3xPop bumpers assy-3x18$
Left campagne kickback assy 500-5053-15$
Outhole assy 500-5082-10$
Shooter hauge-15$
All lamp boards-15$

Diner parts
Sub-playfield shooter assy B-13652-15$
Spekaer panel plastic-25$

TOMMY parts
Memory protection switches assy-14$
Lock ball assy 500-5684-22$
Deflector 535-6606-12$
Coil mounting bracket assy 535-6622-20$
Shaker motor PCB-14$
2xPop bumpers caps-3x5$
2x3-Bank targets assy-2x14$

Baywatch parts
Speaker panel plastic-15$
Apron-17$
Power switch box+volume-20$
Mini-coil(for upper control gate) 500-5968-18$
Mini-coil(for lower control gate) 500-5957-15$

Riverboat Gambler parts
Relay board assy general illumination C-11998-1-10$
Speaker panel assy-15$
Backside plastic-5$
Lamp boards-8$
Shoot line ball feeder assy-10$
Upper left kick assy-14$

Hurricane parts
Backbox lights wood panel full assy-25$
3-Bank drop targets assy-20$
Ball shooter lane feeder C-9638-12$
Outhole kicker assy A-8039-10$
Ball eject B-9361-15$
Shooter rod assy-15$
3-Bank opto board C-13205-20$
Metal upperleft ramp+flap-18$
Lamp boards-14$

Giligan's Island parts
Backbox lights wood panel full assy-27$
2xLamp boards-2x10$
Island mechanism assy A-14595 without the motor-30$
Undertrough plastic ramp assy-2x14$

Bride of Pinbot parts:
Outhole kicker assy-10$
Helmet light boards full assy-20$
Line filter A-14744-20$
Ball shooter feeder assy C-9638-12$
Speaker panel assy without the plastic-20$
Skill shot assy-15$
Loop assy-12$
Kicker assy-18$
3xRight ramp gate+switch full assy-3x15$
Ball gate actuator assy A-14364-20$
Service buttons-14$

Who Dunnit parts:
Backbox wooden panel-30$
Apron-20$
3xslingshots assy-3x15$
Stepper motor board A-19043-30$
3xReels opto single board-3x10$
Ball trough assy A-19963(without the boards)-30$
2xEject assy A-20435-15$
2xTelephone assy A-20574-2x6$
2xRoulette assy-2x8$
2-yellow targets assy-14$
2xSpinner+gate+flash-2x12$
2xLamp baords-2x15$
Trough assy A-20491-18$
Plastic trough assy A-20419-17$
2xBotton trough assy A-20487-2x15$

Demolition Man parts
Motor EMI board A-15542-17$
Tilt mechanism assy-10$
Incline ramp A-17291-15$
All Lamp boards-30$
EYE Gate assy-14$
Left ramp enter assy-8$
Left ramp exit assy-8$
Right ramp enter assy-8$
Right ramp exit assy-8$
Side ramp enter assy-8$
Side ramp exit assy-8$
Super jackpot assy-14$
Demolition time assy-16$
2xFeed ramp-2x20$
Ball popper assy rear A-17215-28$

World Cup Soccer 94 parts
Ball trough assy A-18753(without the boards)-35$
2xBall shooter rod assy A-17730-2x18$
2xGoal Bracket -2x5$
2xSpin ball base-2x10$
2xJackpot boards+plastics assy-2x15$
Playfield assy A-18750-18$

Jurassic Park parts
T-Rex metal plate+wires+bulb sockets assy-14$
Shaker motor board 520-6803-15$
Backbox lock assy-15$
All lamp boards-15$

Maverick parts
Lamp boards-7$
3xOriginal paws-3x6$
Lockball 500-5684-15$
Paddle wheel/Left orbit ball deflector assy-15$
2xMaverick 5-Bank special D.T. assy 500-5912-2x18$
2x4-bank assy-15$
2xFlat rail inner it. orbit w/gate R2-500-5904-00 assy-2x25$
2xFlat rail to VUK left with VUK gate riveted R4-515-6173-00 assy-2x15$
5-Bank drop targets assy-20$
Auto drop assy 515-6111-20$
Paddle wheels metal bracket-10$
Lockdown assy-20$

Jackbot parts:
"Mega Ramp" plastic assy-14$
"Casher" plastic assy-7$
2-switch assy under spiral ramp+ball guide-10$
Rod-15$
Lamp boards-14$
Plastic ramp A-20077-25$
Bottom arch ball guide-15$
2xLock ball outhole kickers assy-2x14$
Helmet plastic-18$
Spiral plastic on spiral ramp-15$
Outhole kicker assy under plastic ramp-14$

Flipper Football (Capcom) parts
Right playfield rails assy+pivot-5$
Left playfield rails assy+pivot-5$
3-Bank drop targets assy without targets-7$
Goal assy-9$
2xSlinghsot assy-2x10$
2xSingle ball ejector assy-4x10$
Drain/kicker assy-15$
2xPlayfield left wheel assy-2x5$
2xPlayfield right wheel assy-2x5$
22xLamp board-15$
2xPlayfield support brackets left & right-2x10$
2xUndertrogh ramp-2x8$

Grand Lizard parts
4-Bank drop targets D-10883-20$
Ball drain assy-10$
Shooter cover-8$
Left playfield pivot-8$
Right playfield pivot-15$

Space Station parts
2xSlingshots assy-2x14$
2xPop bumpers assy-2x17$
Ball popper assy D-11335-40$
Backbox lamps board-18$
All lamp boards-20$
Backbox boards metal plate-25$

No Fear parts
2xPivot bracket assy Left+Right A-20181-2x8$
Rod-15$
2xPin plate weldement 04-10084-2x7$
All lamp boards-14$

Apollo 13 parts
3xTurbo pop bumpers-3x18$
Spinner full assy-14$
Round clear plastic around the moon-14$
"Blastoff" plastic+gate assy-16$
Up/Down post assy 500-6023-27$
Exit to right return ramp-8$
8-ball through exit ramp-6$
Up/Down Ramp plunger assy 500-6044-20$

Dr.Dude parts
Gear D-13793-14$
Driver board C-13509-14$

Kings of steel parts
5-bank drop target assy(wihout the coils)-10$
Apron-15$

Big Guns parts
Ball shooter lane feeder assy-8$
Left eject-10$
Speaker panel plastic-15$
Right Eject-10$
2xRight auto open/close gate assy-2x15$
Backbox inside locking assy-15$
Backbox backside locking assy-17$

Dirty Harry parts
Eject full assembly A-20024-15$

Various parts:
PCBs
Generic Eddy sensor board A-18543-35$
Motor EMI board A-15340-23$
Motor EMI board A-16486-15$
System 9-11 Flipper board-28$
Interconnect board C-11762-32$
PSU D-8345-557 (untested,measured BR ,transistors,fuses,traces,resistors,diodes-ok)-35$

Topper:
TAXI-15$

Cabinet parts-Williams,Bally,Data East,SEGA

Coils NOS-5$ each
Gottlieb A-26642
3xGottlieb A-17876
Data East 10x090-5015

IMPORTANT NOTE: Please don't ask me for parts that are not listed or machine.I like to answer to everyone for everything but this tired me last months.I know that you will understand me.
Parts that are not listed may be some hardware from same machines/era that are compatible with other,but only hardware.

If someone wants something individual from other parts just ask

Delivery information
International and Europe
-Begins from 10$ depending in the country

I work with PayPal:
arakissun@gmail.com

I can reduce the price for multiply items
Everything will be packed very well and safety
 
Last edited:

RGV

Gone Fishin'. Leave a message...
Aug 18, 2013
850
313
63
Middlewich, Cheshire
Are the prices USD, CAD or AUD?

I ask as American, Canadian and Aussie locations are mentioned in the OP and the poster's location is apparently Bulgaria :).
 
OP
OP
A

arakissun

Registered
Feb 21, 2013
409
64
28
37
All prices are in US$
The shipping is the most cheap than every country from Europe to other countryes in Europe,Australia,US,Canada,South Africa.
If someone want something let's ask me,let's not make this threat become a chat,please

About the little high prices,I don't think this.All prices are compare with the prices in US markets from new or not in stock parts.
If someone think that some parts is little high let's give me compare price for the this part and I can reduce mine.
But let's do this on PM or e-mail,and I want only serious buyers.I don't have time to loose it,I have enough work.
I know you will understand me
 

Spandangler

Site Supporter
Jul 21, 2011
4,958
2,729
113
Suffolk
Depending on what the legend says on Thursday when he comes to get the Death Star operational, I may need the baywatch transformer. I've got some strange switching power supply in conjunction with the transformer
 

Replay

Site Supporter
Jul 21, 2011
2,696
1,101
113
Just bought a couple of things, got email, paid, and now waiting for delivery:)
 
OP
OP
A

arakissun

Registered
Feb 21, 2013
409
64
28
37
Prices down and added transformer 5610-12718-00(Dr. Dude, Funhouse, Harley-Davidson (Bally), The Machine: Bride of Pinbot)
 

Dunc

Registered
Jul 17, 2014
366
134
43
Derbyshire
Wish I could say the same. Corvette apron NOT in mint condition as I asked. My current one is better.

Shame tbh, wasted money!

Unless my mint is different to other people's.

Cannot fault delivery time. That was fairly quick.

Hopefully this was a one off. So don't let me put people off. I'm just a bit disappointed :-(

Dunc
 
Last edited:
OP
OP
A

arakissun

Registered
Feb 21, 2013
409
64
28
37
Everyone is free to ask for pictures.Corvette apron was in really good condition,of course I didn't know this for your.May be if I have pictures of your I could make better decision to sell it to you or not.Sorry for this,really,if you want something in future I will recoup this.
 
  • Like
Reactions: Dunc

Dunc

Registered
Jul 17, 2014
366
134
43
Derbyshire
The overall condition is ok. But is does have a 1" round hole drilled into it (which I have no idea why it's there and it's not even drilled that nicely! Lol) along with lots of scratches.

But thanks for replying. I appreciate you getting back to me. This hasn't put me off buying from you, just more detailed description would be good.

And thank you for the offer for future purchases. I will definitely keep this in mind.

Cheers

Dunc