Just connecting this to a Baywatch. One connector CN9 has 4 wires. Do they have to be the exact order as the old board?The existing connector wires are not the same order!
Last edited:
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Sega power supply board
- Thread starter Paul R Owen
- Start date
Just connecting this to a Baywatch. One connector CN9 has 4 wires. Do they have to be the exact order as the old board?The existing connector wires are not the same order!
That's the ac for the gi isn't it are you putting in a replacement x pin board ?
OP
OP
It says "gulf pinball" on the board. It's from Marco.
OP
OP
All 4 look like gi to me?
OP
OP
Looking at the schematics I think CN8 is GI. Anyone know what CN9 does? The schematics indicate that they go to "RY1 24VDC/10A".
OP
OP
New board connected, CN8 &CN9 are just GI. New board working fine! Thanks to Chris B for the advice.