It's time to RUMBLE!!
For sale, Data East Royal Rumble
Great game but I just don't gel with the machine so time for a refresh.
First time selling a pin on here (2nd ever) so hope I've described it clearly.
All working with no known faults, no acid damaged and ive recently replaced the batteries.
The good.
(Replaced in the last year)
New slingshot plastics
New rubbers throughout
100% LEDs (pinball-LEDs)
Stripped, mylar removed (mylar on the mini playfield is in good condition so left it on) and cleaned (I will give it a once over before it leaves)
Pin2DMD (you cannot access the menus with them installed)
New flipper bats
Couple of new coils
Couple of new drops targets and decals (I have some spare decals I didn't use)
Rumble motor working great
Coin mech works
New tag housing (to be fitted)
New balls
New locks (not keyed alike)
The bad
Usual scuffs on the cabinet artwork but otherwise solid
Side rails paint worn at lockdown bar and coin door paint flaking a bit
When removing the mylar, bits of insert decals came with it (about 4 smalls areas). I salvaged what I could and stuck it back down. I touched up the areas and levelled with epoxy. Not really noticeable and doesn't effect play.
The rear left scoop has been glued back together with a glue gun (not by me). I meant to strip it out and have it TIG welded but never got round to it. I don't know how bad the break is but works fine as is. I can get this fixed if preferred but will probably take me a couple of weeks.
Playfield stay missing nut and washer. I can sort this. I've just been lazy and not sorted it for myself.
£2,200 with the PIN2DMD
£2,000 without
I'd prefer not to sell the PIN2DMD but happy to do so as the game is great with it installed. I have a working DMD to go in
Martin due here in the next week or so
OOHHHH YYYEAAAAHHHHH
For sale, Data East Royal Rumble
Great game but I just don't gel with the machine so time for a refresh.
First time selling a pin on here (2nd ever) so hope I've described it clearly.
All working with no known faults, no acid damaged and ive recently replaced the batteries.
The good.
(Replaced in the last year)
New slingshot plastics
New rubbers throughout
100% LEDs (pinball-LEDs)
Stripped, mylar removed (mylar on the mini playfield is in good condition so left it on) and cleaned (I will give it a once over before it leaves)
Pin2DMD (you cannot access the menus with them installed)
New flipper bats
Couple of new coils
Couple of new drops targets and decals (I have some spare decals I didn't use)
Rumble motor working great
Coin mech works
New tag housing (to be fitted)
New balls
New locks (not keyed alike)
The bad
Usual scuffs on the cabinet artwork but otherwise solid
Side rails paint worn at lockdown bar and coin door paint flaking a bit
When removing the mylar, bits of insert decals came with it (about 4 smalls areas). I salvaged what I could and stuck it back down. I touched up the areas and levelled with epoxy. Not really noticeable and doesn't effect play.
The rear left scoop has been glued back together with a glue gun (not by me). I meant to strip it out and have it TIG welded but never got round to it. I don't know how bad the break is but works fine as is. I can get this fixed if preferred but will probably take me a couple of weeks.
Playfield stay missing nut and washer. I can sort this. I've just been lazy and not sorted it for myself.
£2,200 with the PIN2DMD
£2,000 without
I'd prefer not to sell the PIN2DMD but happy to do so as the game is great with it installed. I have a working DMD to go in
Martin due here in the next week or so
OOHHHH YYYEAAAAHHHHH
congrats whoever got this 
. Congrats to the buyer....looks like a great buy
