It pains me to do so, as this is the first pin I ever bought, and is what got me into the slippery slope of Pinball collecting, but it doesn't get played as much as my other machines any more, and I have to make space for another machine incoming.
So up for sale is my RFM
Plays very nicely, the only errors are bulb errors (but they are just false errors as that is where i have fitted a few LED bulbs, and the diagnostics doesn't like LED's)
I did a shop log some time ago to - link here: http://www.pinballinfo.com/community/threads/revenge-from-mars-the-shop-log.13516/
Good points:
Everything plastic has been replaced- replacement ramps, apron, and playfield kit
Metalwork has been blasted and powdercoated red
PC has been stripped, cleaned, new PSU and replacement batteries
The best LCD conversion Ive seen done on these machines incorporating mounting frame with new lamp holder, and wooden infill on the underside to adapt the shape of the hole from rounded CRT to square edged LCD
MyPinballs Saucer mod
MyPinballs Sync adapter
Bad points:
Usual knocks/scrapes, some damaged vinyl around legs (shown in photos)
PCB cover missing in bottom of cabinet
2x places where insert has chipped, but previous owner has put mylar over the top (shown in photo)
£1600 ----> £1500

So up for sale is my RFM
Plays very nicely, the only errors are bulb errors (but they are just false errors as that is where i have fitted a few LED bulbs, and the diagnostics doesn't like LED's)
I did a shop log some time ago to - link here: http://www.pinballinfo.com/community/threads/revenge-from-mars-the-shop-log.13516/
Good points:
Everything plastic has been replaced- replacement ramps, apron, and playfield kit
Metalwork has been blasted and powdercoated red
PC has been stripped, cleaned, new PSU and replacement batteries
The best LCD conversion Ive seen done on these machines incorporating mounting frame with new lamp holder, and wooden infill on the underside to adapt the shape of the hole from rounded CRT to square edged LCD
MyPinballs Saucer mod
MyPinballs Sync adapter
Bad points:
Usual knocks/scrapes, some damaged vinyl around legs (shown in photos)
PCB cover missing in bottom of cabinet
2x places where insert has chipped, but previous owner has put mylar over the top (shown in photo)















Last edited: