Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I don't suppose it matters but can anyone tell me the 'correct way' to thread the top box bolts on an RFM? Which end goes on the outside of the cabinet? I've seen it done both ways
If the larger bits are the bushings, which I think they are - I've just read the manual and it says 'place a bushing in the mounting hole in the cabinet and insert a bolt through the back box.' Weird, cos most have it the other way around.
On mine the bolt is on the outside and the bush is on the inside, I'd hazard a guess that as the bush doesn't stick out as much as a bolt and washer it's less likely to catch on the playfield whilst it's being pulled in and out?