Barely play this any more so it's time to move on.
Playfield is really good, only has slight wear at the point the trough ejects to the shooter lane. The rest of the playfield is really good looking.
For full disclosure the cab could do with a little TLC, decals are peeling a little and a couple of locks are missing - the back door is screwed on. Also the thread is stripped on one bolthole of the front leg plates so there is a nut on the inside to keep it all nice and tight. Included is a spare leg plate, I just never got around to doing it.
Machine has a number of extras already fitted
- Jim's RGB saucer mod
- Jim's 2.24 software running on a PC board running Pinbox
- Martians with lit up eyes
- Shaker motor
- Original monitor replaced with LCD screen
With the machine also comes the following
- Jim's six ball trough kit (new with instructions, not fitted)
- Spare PC motherboard of same model as the one running in the machine.
- Spare hard disk with software installed
- Bag of LEDs. These were installed when I got the machine but I prefer the look of "proper" lamps in this one. I kept all the LEDs though so if they're more your thing you can put them back in again.
- Spare leg plate, didn't get around to installing.
The lamp test is complaining about a couple of lamps, didn't get around to sorting that.
Looking for around the £3k mark. I'm in Maidstone (Kent) about 3 miles from the M20. Martin knows his way here if you don't want to collect yourself. I've attached a bunch of pictures and there is a fairly crappy video here https://1drv.ms/v/s!Aul54gnbeZMyg41rcC5wA_CZX_wQPQ?e=oKEhoG
Anything else you need to know or any other pic just shout.
Playfield is really good, only has slight wear at the point the trough ejects to the shooter lane. The rest of the playfield is really good looking.
For full disclosure the cab could do with a little TLC, decals are peeling a little and a couple of locks are missing - the back door is screwed on. Also the thread is stripped on one bolthole of the front leg plates so there is a nut on the inside to keep it all nice and tight. Included is a spare leg plate, I just never got around to doing it.
Machine has a number of extras already fitted
- Jim's RGB saucer mod
- Jim's 2.24 software running on a PC board running Pinbox
- Martians with lit up eyes
- Shaker motor
- Original monitor replaced with LCD screen
With the machine also comes the following
- Jim's six ball trough kit (new with instructions, not fitted)
- Spare PC motherboard of same model as the one running in the machine.
- Spare hard disk with software installed
- Bag of LEDs. These were installed when I got the machine but I prefer the look of "proper" lamps in this one. I kept all the LEDs though so if they're more your thing you can put them back in again.
- Spare leg plate, didn't get around to installing.
The lamp test is complaining about a couple of lamps, didn't get around to sorting that.
Looking for around the £3k mark. I'm in Maidstone (Kent) about 3 miles from the M20. Martin knows his way here if you don't want to collect yourself. I've attached a bunch of pictures and there is a fairly crappy video here https://1drv.ms/v/s!Aul54gnbeZMyg41rcC5wA_CZX_wQPQ?e=oKEhoG
Anything else you need to know or any other pic just shout.
Attachments
Last edited:
