Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Replacing flipper buttons
- Thread starter DanScu
- Start date
Hi Dan
Pretty straightforward.
Lift playfield.
Remove switch from in front of flipper button. Should be couple of screws.
Undo and remove the large hexagonal nut that secures the flipper button. These can sometimes be a bit stiff. Might need to use needle nose pliers or similar to grip and turn.
The flipper button should then push out.
Put the new one in, will be quite a snug fit. Secure with nut, replace switch.
Diner is a cool game
Pretty straightforward.
Lift playfield.
Remove switch from in front of flipper button. Should be couple of screws.
Undo and remove the large hexagonal nut that secures the flipper button. These can sometimes be a bit stiff. Might need to use needle nose pliers or similar to grip and turn.
The flipper button should then push out.
Put the new one in, will be quite a snug fit. Secure with nut, replace switch.
Diner is a cool game