What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Replacement Optos for TZ Clock and Flipper Buttons

A

Aladeran

Registered
Joined
Aug 30, 2021
Messages
117
Location
Worthing
Hello,

I cannot find the original optos for the TZ Clock and Flipper Buttons. Does anyone have a link to suitable replacements for those?

Cheers, Yannick
 
The optos for the click are different to standard ones and been obsolete for years you would be better fitting a new indigo clock board
Pinball heaven sell the optos for your flippers
 
You would be lucky to get an Ingo clock board at the moment, loads of people have been waiting for a long time for one.
Think they have just got the parts together but haven’t got time for the soldering yet, offering refunds.
Worth the wait if you can get one, waited months for mine last year.
 
If you are into clock optos, speaking as a TZ owner may I offer my sympathies
 
Has anyone tried alternative optos for the clock? The companies that make new clock boards don't seem to have problems with different optos?

Is it possible to buy the clock PCB only, so I can solder my own components? I like DIY projects :)
 
Aladeran said:
Hello,

I cannot find the original optos for the TZ Clock and Flipper Buttons. Does anyone have a link to suitable replacements for those?

Cheers, Yannick
Click to expand...
Pinball Palace have a replacement clock board listed in stock listed at £71 plus vat. I have nos clock assembly that I would part with for £500.
 
M4carp said:
You would be lucky to get an Ingo clock board at the moment, loads of people have been waiting for a long time for one.
Think they have just got the parts together but haven’t got time for the soldering yet, offering refunds.
Worth the wait if you can get one, waited months for mine last year.
Click to expand...
I suggested to the Ingo developer to sell his clock board replacement as a DIY kit, if he cannot cope with the soldering overhead. I hoping for a positive reply.
 
Please. Noone mention the damned clock in TZ.

Mine has been fine for years. Yet within 1 hour of @Sgt GrizZ mentioning the thing- it went wrong.

Let sleeping dogs lie. Don't mention the devil.
 
Ha ha, since I’ve had the Ingo board and hard wiring the trough sensor boards I’ve not had a credit dot and that has been nearly a year now🥳
 
Had the trough sensor problem today too. Reseating the connector did it !
 
You must log in or register to reply here.
Back
Top Bottom