Ant-H
Site Supporter
I’ve finally unpacked the boxes from our recent house move so thought I’d have a little clear out before setting up the new workshop.
I’ll be at pinfest on Saturday so all the below parts can be collected from there. Alternatively I’m happy to post them out
1) Addams Family Fused Magnet Board Mod -
Brand new PCB which has 20mm 2 amp slow fuse for each magnet which greatly reduces the chance of a magnet burning the play field.
It’s a drop in replacement for the original board with no extra harness/wiring needed. Takes minutes to installed. £35 each - 2 available
2) Ghostbusters 3D sling shot mod. Never Installed -
These are printed with flexible resin, hand painted and cleared coated. They take the place of the original plastics that come in the game. Very easy to install and they come with new Purple Petg plastic replacements. £80
3) Assortment of new and used flipper buttons and start/extra ball buttons. - £10
6) Terminator 2 Skull Mod -
3D Printed in resin and replaces the default plastic skull. Red leds from Comet Pinball on the eyes. - £30
7) WPC mpu board. Untested. Has acid damage so is being sold as not working. Hasn’t been worked on before. - £20 PENDING
11) Used Terminator 2 plastic ramp. In good overall condition. Not cracked at the mounting hole. It actually has no cracks at all. Comes with all parts still attached as seen in the photos. - £10
12) 27 used coils. Some are untested but I know over half were working when removed - £50
13) Mod Expansion Board.
Supports 12v and 5v mods. I generally use these boards on games with loads of mods on the playfield.
I fit it under the playfield and plug the mods into it and then you only have 1 set of wires running to the back box to power it instead of multiple wires for each mod. 2 available - £10 each
14) Brand New Silk Screened Fish Tales Plastic Set.
Is nearly a complete set and only missing 3-4, I believe. They still have the protective plastic on installed as well. - £40
16) Brand New Fish Tales Replacement Fishing Reel Sticker Set. Also includes a new ramp flap decal for the mini playfield. - £10
17) 24ct Gold plated shooter rods.
They can come with a standard shooter shaft that fits 90’s Bally/Williams and System 11 games or a Stern shooter rod.
I have a 32mm and 38mm shooter rod end available. Usually £70. Pinfest Price - £40 each
18) Mirrored Polished Shooter Rods.
They can come with a standard shooter shaft that fits 90’s Bally/Williams and System 11 games or a Stern shooter rod.
I have a 38mm shooter rod ends available. Usually £40 Pinfest Price - £30 each
19) Brand New Fish Tales Large Fuse List Decal. - £10
20) New Terminator 2 Laser Canon Mod - Great mod and simple to install. Can be fitted with the original T2 canon cover.
Alternatively can be used in conjunction with a new laser cut canon cover which I can supply in either mild steel or chrome plated.
Laser canon Mod - £40
Mild Steel Canon Cover - £25
Chrome plated Canon Cover - £60
22) Pinshield Dust Cover - Wide body. Like new. - £30
23) Pinshied Dust Cover - Standard body. Great condition. £25
24) Pinshield Dust Cover - Standard body. Good condition. Does have 2 little marks. (See photo) £25
25) Start Button Bezals. Available in Stainless Steel, Chrome plated and Gold Plated.
Stainless Steel £15
Chrome £20
Gold £25
**************************SOLD***************************
4) Brite Sound Red Speaker light kit for WPC games. Brand New - £30 - SOLD
5) Terminator 2 used plastics.
In good condition. Nearly a complete set - £25 - SOLD
21) Used Lock Bar with centre hole for action button. £5 SOLD
15) Brand New Flash Gordon Apron Decal - £5 SOLD
8) Non working Rocket CPU board. Stopped working and I never got round to looking into why. - £25 SOLD
9) WPC-89 sound board. Was pulled working from a T2 so comes with sound roms for the game. Good condition £80 SOLD
10) Original T2 apron. In great condition. The silk screened artwork looks excellent with only a few wear marks at the bottom - £30 SOLD
I’ll be at pinfest on Saturday so all the below parts can be collected from there. Alternatively I’m happy to post them out
1) Addams Family Fused Magnet Board Mod -
Brand new PCB which has 20mm 2 amp slow fuse for each magnet which greatly reduces the chance of a magnet burning the play field.
It’s a drop in replacement for the original board with no extra harness/wiring needed. Takes minutes to installed. £35 each - 2 available
2) Ghostbusters 3D sling shot mod. Never Installed -
These are printed with flexible resin, hand painted and cleared coated. They take the place of the original plastics that come in the game. Very easy to install and they come with new Purple Petg plastic replacements. £80
3) Assortment of new and used flipper buttons and start/extra ball buttons. - £10
6) Terminator 2 Skull Mod -
3D Printed in resin and replaces the default plastic skull. Red leds from Comet Pinball on the eyes. - £30
7) WPC mpu board. Untested. Has acid damage so is being sold as not working. Hasn’t been worked on before. - £20 PENDING
11) Used Terminator 2 plastic ramp. In good overall condition. Not cracked at the mounting hole. It actually has no cracks at all. Comes with all parts still attached as seen in the photos. - £10
12) 27 used coils. Some are untested but I know over half were working when removed - £50
13) Mod Expansion Board.
Supports 12v and 5v mods. I generally use these boards on games with loads of mods on the playfield.
I fit it under the playfield and plug the mods into it and then you only have 1 set of wires running to the back box to power it instead of multiple wires for each mod. 2 available - £10 each
14) Brand New Silk Screened Fish Tales Plastic Set.
Is nearly a complete set and only missing 3-4, I believe. They still have the protective plastic on installed as well. - £40
16) Brand New Fish Tales Replacement Fishing Reel Sticker Set. Also includes a new ramp flap decal for the mini playfield. - £10
17) 24ct Gold plated shooter rods.
They can come with a standard shooter shaft that fits 90’s Bally/Williams and System 11 games or a Stern shooter rod.
I have a 32mm and 38mm shooter rod end available. Usually £70. Pinfest Price - £40 each
18) Mirrored Polished Shooter Rods.
They can come with a standard shooter shaft that fits 90’s Bally/Williams and System 11 games or a Stern shooter rod.
I have a 38mm shooter rod ends available. Usually £40 Pinfest Price - £30 each
19) Brand New Fish Tales Large Fuse List Decal. - £10
20) New Terminator 2 Laser Canon Mod - Great mod and simple to install. Can be fitted with the original T2 canon cover.
Alternatively can be used in conjunction with a new laser cut canon cover which I can supply in either mild steel or chrome plated.
Laser canon Mod - £40
Mild Steel Canon Cover - £25
Chrome plated Canon Cover - £60
22) Pinshield Dust Cover - Wide body. Like new. - £30
23) Pinshied Dust Cover - Standard body. Great condition. £25
24) Pinshield Dust Cover - Standard body. Good condition. Does have 2 little marks. (See photo) £25
25) Start Button Bezals. Available in Stainless Steel, Chrome plated and Gold Plated.
Stainless Steel £15
Chrome £20
Gold £25
**************************SOLD***************************
4) Brite Sound Red Speaker light kit for WPC games. Brand New - £30 - SOLD
5) Terminator 2 used plastics.
In good condition. Nearly a complete set - £25 - SOLD
21) Used Lock Bar with centre hole for action button. £5 SOLD
15) Brand New Flash Gordon Apron Decal - £5 SOLD
8) Non working Rocket CPU board. Stopped working and I never got round to looking into why. - £25 SOLD
9) WPC-89 sound board. Was pulled working from a T2 so comes with sound roms for the game. Good condition £80 SOLD
10) Original T2 apron. In great condition. The silk screened artwork looks excellent with only a few wear marks at the bottom - £30 SOLD
Last edited:
.
