What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Complete Quicksilver again!

  • Thread starter Deleted member 2463
  • Start date
D

Deleted member 2463

So many of you know I bought a quicksilver in from Europe that was absolutely stunning - unfortunately the guy who restored it did his on clearcoat which pretty much failed across the whole game (only JJP worse!) @NewForestPinball is changing the playfield out and here are some WIP photos.

I’m using Yopp GI lights and Keith has done an epic job of putting them in!

4FE30DAE-CE20-43AA-9038-A10AEEE3AA35.jpeg
 
same thing. more power = higher temperature
No it's not. 15W set at 470deg is not the same as 75W 320deg. The former will drop in temperature when soldering a large metal mass but the latter will keep the temperature as set. If you have to set the temperature higher than it should be then the iron is not powerful enough.

David
 
Back
Top Bottom