Hi all. Unfortunately I'm having to sell my project Shadow - I bought this earlier this year and haven't had the time to get it finished. I've bought another machine and have been reliably informed we're on one in one out, and if I don't stick to that I'll be the one going out...
First - the parts I've bought. I've attached photos of all of it, but you have most of the parts here to bring it to a really, really good looking Shadow. Parts I've bought include: Aurich Shadow Translite (these are unobtanium, don't have the speaker panel but I've got an XL Colour DMD so you couldn't fit both anyway), Original translite, 2 phurba dagger plastics, new wall plastic, new kicker arm for Sanctum, rubber set, sanctum decal, various plastic protectors, sealed plastics set from Marco, flasher caps, launch ball button, lollipops board (includes clear star posts and cable splitter), afterglow GI board, sanctum wireform, leg bolts, bag of (mostly white) LEDs, diverter, new battlefield and diverter stickers, XL ColourDMD with speaker panel (this thing is a work of art). I also bought the backbox boards (which wasn't cheap!) but you can see from the photos these have been installed. Also got a piece of acrylic cut to replace the backglass but haven't had time to check the fit.
Now - onto the machine. It's currently in a state of tear-down and you can see from the photos with the sandwich bags what I've removed from the playfield. If you want to see how the machine arrived, have a look at the original project for sale thread (https://www.pinballinfo.com/community/threads/project-bally-williams-the-shadow.51744/) . I'm not sure of what extra parts you'll need but I know you need the 4 bank unit from the upper playfield. Ramp flaps will also need to be replaced and re-riveted. Pistol is missing and I think there are also a few missing rings and little mongol figures - assume you'll have to buy all of them. This is a project, assume you'll have to buy parts but most of it is here. Please ask me if I have any specific parts if you're interested in taking the machine. The list of parts needed is not exhaustive as I haven't had time to check - these are just the parts I know you'll need and I want the prospective buyer to not be surprised when the machine arrives. Just trying to be clear as possible. Cabinet is in the same condition as the original for sale thread - please look at that for reference.
Also comes with lockdown bar and glass.
You can see the machine turns on and goes to scroll through + attract mode. I've attached a picture of the fuse error message on startup.
Here's the test report: check switch 51 wall target down, check switch 55 battle drop down, time and date not set, err mini pfd bad check switches / mtr, err magnet opto is not working, err battle kicker opto not working, err wall tgt bad chk switch / coil, err drop bank bad chk switch / coil, err bat drop bad chk switch / coil
Please note these may not be all the errors but this is what the test report comes out with - I suspect some of these are easily solved but I just don't have the time.
Please PM if you have any questions. Looking for exactly what it owes me - £3600 with the ColourDMD or £3,200 without, but will consider offers. Ideally buyer would come inspect the machine before purchase to make sure they're happy. Hoping this stays in the community, just needs someone with the free time and space!
First - the parts I've bought. I've attached photos of all of it, but you have most of the parts here to bring it to a really, really good looking Shadow. Parts I've bought include: Aurich Shadow Translite (these are unobtanium, don't have the speaker panel but I've got an XL Colour DMD so you couldn't fit both anyway), Original translite, 2 phurba dagger plastics, new wall plastic, new kicker arm for Sanctum, rubber set, sanctum decal, various plastic protectors, sealed plastics set from Marco, flasher caps, launch ball button, lollipops board (includes clear star posts and cable splitter), afterglow GI board, sanctum wireform, leg bolts, bag of (mostly white) LEDs, diverter, new battlefield and diverter stickers, XL ColourDMD with speaker panel (this thing is a work of art). I also bought the backbox boards (which wasn't cheap!) but you can see from the photos these have been installed. Also got a piece of acrylic cut to replace the backglass but haven't had time to check the fit.
Now - onto the machine. It's currently in a state of tear-down and you can see from the photos with the sandwich bags what I've removed from the playfield. If you want to see how the machine arrived, have a look at the original project for sale thread (https://www.pinballinfo.com/community/threads/project-bally-williams-the-shadow.51744/) . I'm not sure of what extra parts you'll need but I know you need the 4 bank unit from the upper playfield. Ramp flaps will also need to be replaced and re-riveted. Pistol is missing and I think there are also a few missing rings and little mongol figures - assume you'll have to buy all of them. This is a project, assume you'll have to buy parts but most of it is here. Please ask me if I have any specific parts if you're interested in taking the machine. The list of parts needed is not exhaustive as I haven't had time to check - these are just the parts I know you'll need and I want the prospective buyer to not be surprised when the machine arrives. Just trying to be clear as possible. Cabinet is in the same condition as the original for sale thread - please look at that for reference.
Also comes with lockdown bar and glass.
You can see the machine turns on and goes to scroll through + attract mode. I've attached a picture of the fuse error message on startup.
Here's the test report: check switch 51 wall target down, check switch 55 battle drop down, time and date not set, err mini pfd bad check switches / mtr, err magnet opto is not working, err battle kicker opto not working, err wall tgt bad chk switch / coil, err drop bank bad chk switch / coil, err bat drop bad chk switch / coil
Please note these may not be all the errors but this is what the test report comes out with - I suspect some of these are easily solved but I just don't have the time.
Please PM if you have any questions. Looking for exactly what it owes me - £3600 with the ColourDMD or £3,200 without, but will consider offers. Ideally buyer would come inspect the machine before purchase to make sure they're happy. Hoping this stays in the community, just needs someone with the free time and space!
Attachments
Last edited:
Honk Honk.
