Problem updating game code using a USB

[Baminb]

Any advice appreciated. I have a Elvira HOH I have just purchased. It has a code 1.03 and on checking the Stern website the latest code is 1.12.
I have downloaded the file to a USB using both a Android phone and most recently a Apple Mac but on inserting the USB to the advised input behind the glass screen the pin does not recognise it on start up and goes straight to game play. I have checked that the file has been downloaded which it has so any advice would be appreciated.

Cheers Billy

 

[Fantazia2]

Is the pen drive formatted in FAT32?

If you have Insider fitted you should be able to download the update over WiFi if available.

 

[kevlar]

Do you have the file in a folder? It shouldn't be in a folder, just the file on the usb stick. Also, try a different usb stick.

 

[Baminb]

Thanks for the feedback . It does not have Insider unfortunately. I did format it to FAT32 and it's the same drive I used for a prior update on a TBL. It's in a folder so I will try it without a folder and maybe another USB to be sure - other option is to buy an Insider kit.
Don't know what the new codes bring but plays great.
Thanks again for your help guys

 

[Fubar]

Another option if you have a SD card slot in your computer is to write a whole new SD card with an image from Stern's website.

 

[Moonraker]

Sterns are incredibly fussy about size and format of USB sticks. For a Spike 2 I'd try one that is 8 GB or perhaps 16 GB, definitely not any larger.

 

[Baminb]

Sterns are incredibly fussy about size and format of USB sticks. For a Spike 2 I'd try one that is 8 GB or perhaps 16 GB, definitely not any larger.

Thank you will give that a go

 

[Baminb]

Thanks fellas all sorted