Play Field Wire Form Repair

[Matrixnetuk]

Hi Guys,
Im guessing it was only a matter of time when this might happen , but can any members suggest the best way to "re-fit" a wire form that has worked loose from the playfield ...its just the top side of the form that that has come out and moved across to block the outlane handy for not loosing the ball but would really like to get this back in
Picture is from before it came loose but shows the suspect wire location
Thanks in advance
Stef

 

[Mfresh]

I've fixed this type of problem with a drop of superglue in the hole and then hammer the wire back in the hole with a rubber mallet till it is all the way in. If the hole is too big then you can put tiny slivers of matchstick into it before refitting the wire.

 

[AlanJ]

^ i second that superglue

 

[Matrixnetuk]

Yikes Superglue scares me as i dont want that on my playfield...every time i squeeze one of those tubes it shoots out everywhere lol

 

[AlanJ]

I put a drop on the end of a cocktail stick , I used a piece of tinfoil with a hole in it over the hole, just to catch any spillage (there wasnt any).

 

[Matrixnetuk]

Thanks fellas will get this sorted