- Joined
- Jul 21, 2011
- Messages
- 531
Fishy has stopped flipping. At first it would be OK for a few games then the flippers would stop without warning. This lasted for a few days then they packed in completely.
Put it into test, both hold & flip work but in switch test nothing. All other solenoids are working during game play.
Getting a healthy 12V (15.06V actually) at pin 2 J116 & continuity from that to the opto flipper board pin 1, grey/yellow wire, but not getting anything like that at either flipper onto board? Don't know if this is right but it seems wrong to me.
Assuming this is OK then it leads me to think the problem lies between the flipper boards to the opt board to the CPU.
Any ideas from the great & the good out there gratefully received,
Cheers,
Alan.
Put it into test, both hold & flip work but in switch test nothing. All other solenoids are working during game play.
Getting a healthy 12V (15.06V actually) at pin 2 J116 & continuity from that to the opto flipper board pin 1, grey/yellow wire, but not getting anything like that at either flipper onto board? Don't know if this is right but it seems wrong to me.
Assuming this is OK then it leads me to think the problem lies between the flipper boards to the opt board to the CPU.
Any ideas from the great & the good out there gratefully received,
Cheers,
Alan.