M
Mark
Hi guys, my Grand Prix has a Money Controls SR3 coin mech. Unfortunately it is not working at the moment, however, when I swapped over the C120 mech from my TSPP everything was ok, so I think either the SR3 mech is faulty or possibly it is set up wrong.
Before I write it off as a faulty mech, could anyone with a machine with a working SR3 mech have a look at theirs and let me know what settings they have on the DIP switches (the 6 on the side and 8 at the bottom).
I have found the manual online, but unfortunately it didn't really help.
Thanks in advance,
Mark
Before I write it off as a faulty mech, could anyone with a machine with a working SR3 mech have a look at theirs and let me know what settings they have on the DIP switches (the 6 on the side and 8 at the bottom).
I have found the manual online, but unfortunately it didn't really help.
Thanks in advance,
Mark