Molex connectors for Williams system 7

[HomerRamone]

Anywhere know the best place to buy a set of these in various sizes (4,6 and 9 way look to be what I need). Ideally the plugs and the deelys to crimp onto the ends of wires to shove into the plugs. (Crimping them on seems like a better option than shoving them in ? )

 

[Andy_B]

I seem to to remember the pins and housings are different for the master display board than the rest of the boards.

Just get the longest connector available and cut to size. 20 or 24 pin should be available.

Sent from my SM-G960F using Tapatalk

 

[HomerRamone]

Yeah - ideally I wont both - but likely more of the "regular" ones (as in the ones that go onto pins rather than the edge of a circuit board.

 

[Andy_B]

If you don't want to faff about the connectors, pins and crimper are available at pinparts.co.uk

Alternatively search for 0.1" or 2.54 mm connector plugs with locking ramp. RS, Farnell, Digikey, Mouser etc.
The Molex part for a 20 pin connector is 22-01-2207 which shows on some sites as being obsolete but which may suggest an alternative.
Crimp pins are 08-52-0123 or equivalent. Not sure about crimpers[emoji846]

Sent from my SM-G960F using Tapatalk

 

[HomerRamone]

I've got the crimpers I think. Ideally I was looking to get the plug and pins as a bundle.

 

[HomerRamone]

Isnt it 0.156 (3.9mm) ?

 

[Andy_B]

Yes sorry, senior moment.

Sent from my SM-G960F using Tapatalk

 

[HomerRamone]

Think ive found the main board ones. Will see when they arrive