Missing post Wms IJ

[Gregors]

Missing metal post with thread on top to attach but to hold down plastic (see hole in picture) there's no thread either in the hole. Anyone know what and where to get it? Have looked myself couldn't find anything!!
Many thanks
Below is library pic off ipdb


Sent from my iPhone using Tapatalk - now Free

 

[Lee ellison]

If i,m looking at it right , there is no post on the other pic , it is a longer rubber that that fits over the 3 posts that you have on yr PF. ?

 

[Gregors]

This pic shows it better


Sent from my iPhone using Tapatalk - now Free

 

[Moonraker]

The post is probably not missing at all... it was probably cut from the production line as un-necessary extra cost...!

However it is probably one of these:
http://www.marcospecialties.com/pinball-parts/02-4426-2
With one of these to hold the rubber in place:
http://www.marcospecialties.com/pinball-parts/03-9357-13

Similar to what you have in the first picture with the top star post that holds the plastic too.

 

[Calimori]

Just checked and my IJ has four posts and one long band.

 

[Gregors]

Thanks for confirming is it possible you could see what type of post it is and what it screws into for me?
Thank you


Sent from my iPhone using Tapatalk - now Free

 

[Calimori]

Sadly it would require the ramp and the Path of Adventure to be removed and I am meant to be working on other things. I managed to take this picture for you, as you can see it has a metal post. Mine is filthy as I haven't got around to shopping the machine yet.

I don't see anything underneath so I can't be sure if it is a wood screw or a nut to hold it in place.

 

[Gregors]

Top man really appreciate that
Many thanks


Sent from my iPhone using Tapatalk - now Free