Here are some boards I have lying around and which are now for sale. If you are interested in any of the following read on...
(All prices do not include postage)
Homepin Fliptronics 1 and 2 board brand new £90
Bally / Stern MPU Multi-Rom 128 v2 £25
Proximity sensor pair from Twilight Zone (detects powerball in trough) £15
Williams /Bally WPC system bi -directional motor control board used in Circus Voltaire, White Water and Dr Who £45
A-2518-18 Bally rectifier board, munted and shot to hell. Working status: not a chance £5
As 2518-56 Sounds Plus board (xenon) works £60
Bally rectifier board with bridges underneath. Working status unkown so assume not £10
Meanwell power supply suits Spooky TNA and others £18
Homepin Fliptronics 1 and 2 board brand new £90
Bought from Retro Arcade Specialists a few months back but not needed. Cost £103.99 and currently out of stock there.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Bally / Stern MPU Multi-Rom 128 v2 £25
Bought a while back and unused so as new
++++++++++++++++++++++++++++++++++++++++++++++++++++++
Proximity sensor pair from Twilight Zone (detects powerball in trough) £15
Taken off a Twilight Zone. They work but need fiddling with or plug reseating every 6 months or so. Two wires have been soldered to connector as poor connection is often a problem because the plug comes loose.
+++++++++++++++++++++++++++++++++++++
Williams /Bally WPC system bi -directional motor control board used in CIRQUS VOLTAIRE, WHITE WATER, and DR WHO £45
This works most of the time. Repairs visible on the back where tracks are broken. Would work more reliably if repaired more competently.
+++++++++++++++++++++++++++++++++++++
A-2518-18 Bally rectifier board shot to hell. Working status: not a chance! £5
For spares or repair - this won't work as the connectors are burned for a start
+++++++++++++++++++++++++++++++++++++++++++++
As 2518-56 Sounds Plus board (Xenon) . Working but not tested. £60
I think I bought this from Keef @new forest pinball as a fully working board. It is very clean, it has been repinned, and appears to have new capacitors too. I don't have Xenon any more so can't test it. (I think it also works in early Flash Gordon machines too.) If you buy it and it doesn't work then happy to take it back.
+++++++++++++++++++++++++++++++++++
Bally rectifier board with bridges underneath. Working status unkown so assume not £10
No idea if this works or not.
++++++++++++++++++++++++++++++
MeanWell power supply, suits Spooky TNA and probably many others £18
Working. Pulled from a TNA.
(All prices do not include postage)
Homepin Fliptronics 1 and 2 board brand new £90
Bally / Stern MPU Multi-Rom 128 v2 £25
Proximity sensor pair from Twilight Zone (detects powerball in trough) £15
Williams /Bally WPC system bi -directional motor control board used in Circus Voltaire, White Water and Dr Who £45
A-2518-18 Bally rectifier board, munted and shot to hell. Working status: not a chance £5
As 2518-56 Sounds Plus board (xenon) works £60
Bally rectifier board with bridges underneath. Working status unkown so assume not £10
Meanwell power supply suits Spooky TNA and others £18
Homepin Fliptronics 1 and 2 board brand new £90
Bought from Retro Arcade Specialists a few months back but not needed. Cost £103.99 and currently out of stock there.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Bally / Stern MPU Multi-Rom 128 v2 £25
Bought a while back and unused so as new
++++++++++++++++++++++++++++++++++++++++++++++++++++++
Proximity sensor pair from Twilight Zone (detects powerball in trough) £15
Taken off a Twilight Zone. They work but need fiddling with or plug reseating every 6 months or so. Two wires have been soldered to connector as poor connection is often a problem because the plug comes loose.
+++++++++++++++++++++++++++++++++++++
Williams /Bally WPC system bi -directional motor control board used in CIRQUS VOLTAIRE, WHITE WATER, and DR WHO £45
This works most of the time. Repairs visible on the back where tracks are broken. Would work more reliably if repaired more competently.
+++++++++++++++++++++++++++++++++++++
A-2518-18 Bally rectifier board shot to hell. Working status: not a chance! £5
For spares or repair - this won't work as the connectors are burned for a start
+++++++++++++++++++++++++++++++++++++++++++++
As 2518-56 Sounds Plus board (Xenon) . Working but not tested. £60
I think I bought this from Keef @new forest pinball as a fully working board. It is very clean, it has been repinned, and appears to have new capacitors too. I don't have Xenon any more so can't test it. (I think it also works in early Flash Gordon machines too.) If you buy it and it doesn't work then happy to take it back.
+++++++++++++++++++++++++++++++++++
Bally rectifier board with bridges underneath. Working status unkown so assume not £10
No idea if this works or not.
++++++++++++++++++++++++++++++
MeanWell power supply, suits Spooky TNA and probably many others £18
Working. Pulled from a TNA.
Attachments
Last edited: