I like to point out known issues, so lets start with those - Cabinet has small mark on left backbox lower left corner (barely noticeable) and right backbox lower right corner a small part is missing. Slight wear around 1st drop target at rear and the plastic covering the drop targets is cracked. Some wear to inserts in front of flippers (black edges missing) and there are 2 lines locked on on the DMD.
Now all the bad stuff is out of the way, the machine is fully working and clean, it's probably the nicest cabinet I've seen on a used Metallica. There are LEDs in the GI, the rest is all standard lamps, I have a new magnet pole for Sparky which I will fit. Martin is due with me tomorrow so can be collected then
Now all the bad stuff is out of the way, the machine is fully working and clean, it's probably the nicest cabinet I've seen on a used Metallica. There are LEDs in the GI, the rest is all standard lamps, I have a new magnet pole for Sparky which I will fit. Martin is due with me tomorrow so can be collected then
