Wanted Magnet and bracket

[s000m]

A-15257 Magnet Bracket and Pole Assembly

And

20-9247 Magnet Coil

The magnet I have here got destroyed trying to pry it off the mullered core.

Before I place an international order does anyone have these? Preferably new.

Cheers,

Scott

 

[Asiapinball]

Pinballmania and retro both have the coil.

 

[s000m]

Yeah issue there is without the bracket I'll be adding on unnecessary shipping costs. It'll be easier to just order both from somewhere.

 

[Garry Sp8]

Could you use the other style bracket with separate adjustable core:

Williams/Bally/JJP Magnet Bracket - A-16460

Williams/Bally/JJP Magnet Bracket - A-16460 Magnet mounting bracket used in Williams' Dirty Harry & Bally's Twilight Zone pinball machines. Also used in JJP's Dialed In, Wizard of Oz & Pirates of the Caribbean pinball machines. Williams/Bally #A-16460. Jersey Jack Pinball #10-005008-00 &...

retroarcadespecialists.co.uk

MAGNET CORE PLUG 530-5320-00.

MAGNET CORE PLUG Threaded core plug with flat top. Data East/Sega/Stern #530-5320-00. Williams/Bally reference #02-4773. Chicago Gaming Company #PIN-MLS-MAGCORE.

retroarcadespecialists.co.uk

3/4″ MAGNET CORE HEX NUT

3/4″ MAGNET CORE HEX NUT

retroarcadespecialists.co.uk

 

[Asiapinball]

Do check that you have the correct bracket you need. There are 2 on wcs94 and they are different. You have listed the main playfield one which I am surprised by as it is usually he mini playfield one that gets bashed up. The mini playfield one has a longer core to go all the way through the playfield.

 

[s000m]

Could you use the other style bracket with separate adjustable core:

Williams/Bally/JJP Magnet Bracket - A-16460

Williams/Bally/JJP Magnet Bracket - A-16460 Magnet mounting bracket used in Williams' Dirty Harry & Bally's Twilight Zone pinball machines. Also used in JJP's Dialed In, Wizard of Oz & Pirates of the Caribbean pinball machines. Williams/Bally #A-16460. Jersey Jack Pinball #10-005008-00 &...

retroarcadespecialists.co.uk

MAGNET CORE PLUG 530-5320-00.

MAGNET CORE PLUG Threaded core plug with flat top. Data East/Sega/Stern #530-5320-00. Williams/Bally reference #02-4773. Chicago Gaming Company #PIN-MLS-MAGCORE.

retroarcadespecialists.co.uk

3/4″ MAGNET CORE HEX NUT

3/4″ MAGNET CORE HEX NUT

retroarcadespecialists.co.uk

I like that one, but I think the clearance might be an issue. It's for the mini playfield on WCS.

 

[s000m]

Do check that you have the correct bracket you need. There are 2 on wcs94 and they are different. You have listed the main playfield one which I am surprised by as it is usually he mini playfield one that gets bashed up. The mini playfield one has a longer core to go all the way through the playfield.

Oh crap ok!

 

[s000m]

Oh crap ok!

I went with the style I pulled from the mini playfield it makes sense it's wrong as it does fully sit flush with the playfield!

 

[s000m]

A-18157 - Magnet bracket and pole piece assembly - Marco Specialties Pinball Parts

Magnet bracket and 15/16" pole piece assembly

www.marcospecialties.com

Is the correct one I'm after, thanks @Asiapinball

 

[Asiapinball]

Yes that's the one for the mini playfield

 

[Asiapinball]

As per manual part number 3.

I think best of pinball have both bracket and magnet and they may be your best supplier as I doubt you will find the bracket in stock in the uk.

 

[Asiapinball]

Best of pinball are out of stock. Looks like only stock is marcos.

 

[s000m]

@Asiapinball Any ideas where this part is from? I'm thinking a plastic.

I can't seem to locate it from my pictures.

 

[s000m]

Could also be from a ramp

 

[Asiapinball]

Not sure. Possibly here. @zxspectrum16k may be able to help. It was 2.5 years ago since I did my wcs and not at home at moment.

 

[zxspectrum16k]

I just had a quick look at the playfield, and underneath, I couldn't see anything like that. I am just off to the cinema. But I will be home tomorrow, and can have a better look then. @s000m if you want to FaceTime me tomorrow, I can pan around the machine. Not a problem
Mine needed some fixing up when I got it, and it's still WiP but plays nicely.

 

[s000m]

Thanks appreciate it. It's definitely a top side metal. I'm thinking either ramp or plastic. I was drilling rivets off at one point and I think I just left this on the desk without cleaning and putting it onto whatever it's new home was.

Could also just be part of my homebrew graveyard