Lucky Strike Rubber Sizes

[Cmor111]

Anyone know the sizes of rubber for a Williams Lucky Strike, or any UK traders who sell them as a kit?

Just got the machine and in the middle of cleaning it up, I know I can order from USA and I expect I'll be doing that for the schematics but just be easier over here.

Any advice is greatly appreciated, thanks.

 

[ronsplooter]

Just buy a box a rubbers from the Legend (always useful to have spares)

 

[Cmor111]

Just buy a box a rubbers from the Legend (always useful to have spares)

Cheers,

Just checked out the box in question, unfortunately they only go up to 3.5" and LS has a couple of big rubbers. I could always measure the inside length and use that as a guide for the new ones.

 

[Moonraker]

Many rubbers do have their size included on them, so have a closer look (with a magnifying glass perhaps).

 

[Cmor111]

Many rubbers do have their size included on them, so have a closer look (with a magnifying glass perhaps).

Thanks Moonraker, tried that already but most of them are so old that they're just breaking up and can't see any sizes on them.

I should be able to work them out as the bigger the sizes the bigger the gap between them.

 

[PinballDaze]

I have 4" and 4 1/2" white rubbers if still needed?

 

[Cmor111]

I have 4" and 4 1/2" white rubbers if still needed?

Thanks for the offer but I've already worked out what I need and ordered from @pinballmania along with some other bits and pieces.

 

[cooldan]

I have 4" and 4 1/2" white rubbers if still needed?

pffftttttt!

i'd need at *least* 5 1/2 inch rubbers