Lower right flipper won’t stay up - Judge Dredd Fliptronics

[Field305]

Hi all, having a bit of trouble with my Judge Dredd machine. For some reason, I can’t cradle the bottom right flipper, when I hold the button it just does one hard flip and won’t stay up. The upper right flipper is working just fine. Luckily I own a World Cup 94 and tried the below remedies by trying out different parts but still had no success. Any advice would be greatly appreciated. Thanks all!

All items listed below I tried with no success
1. Tested all optos in the test menu
2. Tried using right flipper opto board from WC94
3. Tried using fliptronics board from WC94
4. Replaced coil stop, coil, and EOS switch
5. Adjusted EOS switch every which way
6. Checked continuity and all was fine between BB and PF

 

[paddythegreek]

Possibly the hold wire on the flipper coil has broken off where it attaches to the solder lug.
You got one thick and one thin wire on the coil. Check ones not broken/ come adrift.

 

[Field305]

Hold wire was broken. Thank you so much!

 

[paddythegreek]

Glad you sorted it