What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

LOTR RESET

Dave Bishop

Site Supporter
10 Years
Joined
Jul 21, 2011
Messages
4,463
Location
Sidcup, Kent
Hi guys, got trouble with LOTR. The game keeps resetting. It arrived yesterday night so left it to warm up in my cabin. Today I turned it on and going through switch tests it reset when pressed a path of the dead switch. Then it reset when I shot a ball into the ring magnet, it did it twice so I decided to test all coils, the magnet worked. So started another
Game and now it resets, then DMD flicks off the resets !?? I've attached a video
 
Check and reseat all cables first...

Then check and reseat game ROM's...

Good Luck!
 
Thanks will try it again,

I already checked all connectors and made sure they were all pushed in, always do this when a new pin arrives.

The game now just makes a clicking noise and keeps resisting. I have an IPhone video, but it won't upload on pininfo
 
Update to LOTR.

After looking on Pinside a couple of reports of the game resetting when switch matrix and/or light circuit touch. Common place was at the Balrog. Took him apart, found some numpty had put in a #44 bulb which was blown (2006 model). Replaced with correct 12v LED and adjusted switch. No problems now.

Cheers all
 
Back
Top Bottom