100% fully working, nice condition Data East machine from 1992
Can be viewed/played - preferred before purchase.
Located near Woking, between M25 J10 A3 and J11 Chertsey.
I've had this in my collection since 2003.
Only selling because I have too many machines and another on the way!
I always thought this would be a keeper, so looked after it as such.
Playfield was originally fully stripped, cleaned and rebuilt with many new parts, coils, switches, drop targets etc.
Since then it has had several sets of rubbers, balls, lamps, batteries etc. even though it has only had minimal home use.
Regularly cleaned and waxed.
Original working Topper.
Running on Chad's v3.01 game code, which includes nearly 200 improvements to gameplay, sound, call outs and scoring making this a much better game to play.
www.pinballcode.com
Power supply board was rebuilt in 2020. If I was going to keep, I'd probably fit a new Xpin board.
Other boards have been re-flowed, Sound board re-capped, PPB board repaired with new transistors.
New GI connectors/headers.
White North Noise filter fitted.
Col's Pinball Mods Airball protector above drop targets.
Flipper assemblies recently rebuilt including coils and all hardware.
Has faded cabinet and translite, a few scratches and scrapes on cabinet, one crack in left pop bumper top, small crack in playfield coating above top lanes/911 inserts, one damaged plastic (bottom 1cm broken off - replacement included in sale), gun coating deteriorated, DMD takes 3 or 4 seconds to fully light up.
All shown in the photos. Nothing that interferes with gameplay.
Will come with original operators manual, flyer, price/rule cards, Keyring, backbox allen key.
Replacement for broken plastic (not a perfect colour match so I left original fitted with clear washer as protection), v3.00 rom chip if you want to return to official game code.
Any questions, more photos, just ask!
Thanks for reading.
Rob
Can be viewed/played - preferred before purchase.
Located near Woking, between M25 J10 A3 and J11 Chertsey.
I've had this in my collection since 2003.
Only selling because I have too many machines and another on the way!
I always thought this would be a keeper, so looked after it as such.
Playfield was originally fully stripped, cleaned and rebuilt with many new parts, coils, switches, drop targets etc.
Since then it has had several sets of rubbers, balls, lamps, batteries etc. even though it has only had minimal home use.
Regularly cleaned and waxed.
Original working Topper.
Running on Chad's v3.01 game code, which includes nearly 200 improvements to gameplay, sound, call outs and scoring making this a much better game to play.
PinballCode.com - LW300
Power supply board was rebuilt in 2020. If I was going to keep, I'd probably fit a new Xpin board.
Other boards have been re-flowed, Sound board re-capped, PPB board repaired with new transistors.
New GI connectors/headers.
White North Noise filter fitted.
Col's Pinball Mods Airball protector above drop targets.
Flipper assemblies recently rebuilt including coils and all hardware.
Has faded cabinet and translite, a few scratches and scrapes on cabinet, one crack in left pop bumper top, small crack in playfield coating above top lanes/911 inserts, one damaged plastic (bottom 1cm broken off - replacement included in sale), gun coating deteriorated, DMD takes 3 or 4 seconds to fully light up.
All shown in the photos. Nothing that interferes with gameplay.
Will come with original operators manual, flyer, price/rule cards, Keyring, backbox allen key.
Replacement for broken plastic (not a perfect colour match so I left original fitted with clear washer as protection), v3.00 rom chip if you want to return to official game code.
Any questions, more photos, just ask!
Thanks for reading.
Rob
