Junk yard in overall nice condition. I did a full tear down or this a month or so ago, all logged in the shop thread. I will try and add a link to it as it’s well worth checking it out so you can see everything in detail Did quite a bit to this one. Fully stripped clean and waxed the playfield. All plastics and ramps were cleaned and polished. A couple of new high quality plastics were replaced. New star posts and full light blue Titan rubber kit. All the rubber toys were removed and cleaned. Both flippers fully rebuilt with new coils and new white Williams bats. Cliffys have been fitted to ramp & sewer shot. No wear underneath just added to protect. I also have the cliffy for the shooter lane scoop but it arrived late so never got fitted. New spinner and official spinner decal added, along with new outlane posts. New official crane decal. Cols fluorescent protectors added which look awesome. The plastic behind the wrecking ball was broken in two places and has been glued back together. I was going to buy a new one but been told they break very quickly so I just repaired. Playfield is in overall pretty decent shape. Only but of wear is some spirally type cracking around the slings, not really seen before but believe it mush be from just drying out and lack of cleaning in the last. Not noticeable really unless your looking for it. I will try and get some close ups of it to show. When I got the game it had a valley speaker panel with it, I managed to get a Williams one and fitted that also with a new anti glare screen. The Williams logo is gold though, (TOTAN I believe). All the cab inside was cleaned along with all the wiring and harness, new flipper buttons, pal nuts, shooter hardware and sleeve. Lockdown receiver was cleaned and polished up with new decals installed. Full colour coded Twin SMD premium LED’s have been fitted to all inserts, all inserts where cleaned too. Cool White GI and in the back box. Also flashers were changed. Trough is also lit with a cool white LED strip. All boards look good and the battery pack has remote mounted. Game will come with an original DMD without any issues.
Cabinet does have a few knocks and a few graffiti type scratches on the sides. Will show all in photos. No highly noticeable but they are there. Colours are great on it. The coin door isn’t the best and has been dented in the centre. I reckon it could be straightened out but obviously could be easily replaced if wanted. Legs are pretty decent but doe have a few rusty spots on the insides, although I have scrubbed them all clean, more like there stained now. The leg brackets aren’t the best as a few were stripped. I added nuts whilst replacements were on there way, but haven’t fitted them yet. But will add with the sale or can replace when sold and I tombstone her. When the machine was shopped, I replaced most of the hardware with new, so pretty much every but and hex bolts are new. Also done a A3 reprint laminated data sheet for the bottom of the cab.
The game currently has my home made pin stadium type lights fitted as JY can be quite a dark game. But I know there not to everyone’s taste. They are only cool white and are on a dimmer by the coin door and run off a separate 12v power supply. I can leave them in or remove if preferred.
Looking for £2800
Collection is fine or Martin, his been here a few times before.
I am out for the day today but will add better photos when I get home this evening, also easier to add photos on the Mac that the phone.
May not reply straight away but will do as soon as I can and will of course work on first come first served basis.
Junkyard clean up
https://r.tapatalk.com/shareLink/topic?share_fid=26429&share_tid=46528&url=https://www.pinballinfo.com/community/index.php?threads/Junkyard-clean-up.46528/&share_type=t&link_source=app
Sent from my iPhone using Tapatalk
Cabinet does have a few knocks and a few graffiti type scratches on the sides. Will show all in photos. No highly noticeable but they are there. Colours are great on it. The coin door isn’t the best and has been dented in the centre. I reckon it could be straightened out but obviously could be easily replaced if wanted. Legs are pretty decent but doe have a few rusty spots on the insides, although I have scrubbed them all clean, more like there stained now. The leg brackets aren’t the best as a few were stripped. I added nuts whilst replacements were on there way, but haven’t fitted them yet. But will add with the sale or can replace when sold and I tombstone her. When the machine was shopped, I replaced most of the hardware with new, so pretty much every but and hex bolts are new. Also done a A3 reprint laminated data sheet for the bottom of the cab.
The game currently has my home made pin stadium type lights fitted as JY can be quite a dark game. But I know there not to everyone’s taste. They are only cool white and are on a dimmer by the coin door and run off a separate 12v power supply. I can leave them in or remove if preferred.
Looking for £2800
Collection is fine or Martin, his been here a few times before.
I am out for the day today but will add better photos when I get home this evening, also easier to add photos on the Mac that the phone.
May not reply straight away but will do as soon as I can and will of course work on first come first served basis.
Junkyard clean up
https://r.tapatalk.com/shareLink/topic?share_fid=26429&share_tid=46528&url=https://www.pinballinfo.com/community/index.php?threads/Junkyard-clean-up.46528/&share_type=t&link_source=app
Sent from my iPhone using Tapatalk
Last edited:
