Sold Judge Dredd

[MartinY]

Hiya - a couple of NIB pins inbound so something has to go. First up is my Judge Dredd.

I bought it due to it's condition - it had been restored by the previous owner. Work done on it includes:

• All metal parts tumbled/polished/replaced as required
• All switches cleaned and adjusted as required
• All targets cleaned, new target sponge fitted
• Full playfield stripdown, treasure cove deep clean and three layers of wax applied
• Playfield protector fitted to maintain the mint and very shiny playfield going forwards
• New balls fitted
• Full premium white rubber kit fitted
• Wiring loom cleaned
• All metal ramps polished
• All plastic ramps polished
• Coloured post sleeves fitted
• All subways cleaned and polished
• Drop targets fully stripped, cleaned and re-built

I have added colour-matched LEDs to the inserts (but not under the deadworld) and pretty much nothing else as it works 100% and has done since I've had it.

Cab in good condition, but with normal fade (never terrible on JD). As you can see, it does have the original topper. A couple of slight dings on the rails but I never really noticed them until I took the photos.

DMD is fine apart from the very right hand column is out (you can see on the 2 player photo). Doesn't affect anything. Pictures attached.

Looking for £2100 ONO. Machine is in Liphook.

 

[Andydn]

This would be my ideal 2nd pin, looking into raising the funds now, lovely looking machine.


Sent from my iPhone using Tapatalk

 

[Daywalker]

hi mark here. ive just been gazumped on a Judge Dredd seller BenNinja . had his pin up back in march 18 , pinged him 3 days ago , i said i would have it and waiting on updated photos , sold it without telling me , not nice !! just a quick message to see if you are willing to let yours go for £1600 same as his , if not dont worry im only asking , Thanks .

 

[MartinY]

No mate, too much done to this one to let it go for that.

 

[Andydn]

Didn’t realise this was a ‘wide body’ - how much wider are these than standard width pins?


Sent from my iPhone using Tapatalk

 

[MartinY]

Backbox and therefore total pin width is the same. It's only the playfield that is wider.

 

[CHRIS B PINBALLS]

I don’t normally comment on fs posts but this looks the nicest jd I have seen for sometime even got the topper most certainly worth the extra over the other one

 

[Daywalker]

ok how much we talking bottom line ?

 

[Tony]

Private PM? Maybe?

 

[Daywalker]

done , just waiting for decision . ?

 

[7oxford]

Why the different colour flipper rubber?

 

[ronsplooter]

Why the different colour flipper rubber?[emoji848]

I’m guessing blue and red to match the pursuit lights on the ramps

 

[DanLewell]

I’m guessing blue and red to match the pursuit lights on the ramps

Yep.
Played this today, it's in great condition. Whoever buys it wont be disappointed.

 

[MartinY]

Thanks @CHRIS B PINBALLS and @DanLewell. Different flipper rubbers are indeed to match the pursuit lights. @Hiro996 did a great job on this machine and only selling due on an inbound NIB.

@Todd.l has first refusal. @Daywalker, I'll PM you.

 

[MartinY]

Sorry, meant @Todd.l has first refusal!!!!

 

[Andydn]

I’d like to take this if no one else is please.

 

[Daywalker]

Has Todd.1 taken it yet ? because im still waiting to hear !

 

[Daywalker]

ok thanks for that . ! would have been nice to have been told whats going on , i was quite prepared to pay the £1950 not just ignored !!!!!!

 

[stumblor]

ok thanks for that . ! would have been nice to have been told whats going on , i was quite prepared to pay the £1950 not just ignored !!!!!!

I think it's because you posted on his status page - for all to see!

For a private PM hover over the user > start conversation

 

[Daywalker]

Thanks for that new to all this !!!

 

[MartinY]

Sold and collected now chaps - thanks for the interest!

 

[MartinY]

And donation made...