Hi
looking to make space for the Video Cab of my dreams; a Starwars Upright.
£3650. If you have a Star wars Upright (project / working) for trade we can also talk
If you have been round mine during the Midlands meet or NLP last year, chances are you have played my Iron Man. It did have a knackered right ramp. It now has a brand new right hand ramp
Both ramps are now fitted with Cliffeys.
The legs side rails and lock down are a metallic Iron Man colour (automotive not powder coat) that really makes the machine look like the dogs danglly bits.
I have cliffies on the shooter lane, iron man badges in the speaker grills.
It has a shaker motor.
Mirrored blades inside.
It has LEDs, don't know what sort.
It will also come with a complete set of playfield / ramp decals. I bought them for the three ramp decals i thought i may need for replacing the ramp. Turned out that i managed to get the old ones off with the Mrs hair dryer and onto the new one - no loss of sticky
Factory Mylar around bumpers, and i added mylar circles around the magnets.
I will also sling in an original Iron Man manual.
Some scuffs and scrapes here and there. Playfield could do with a bit of a clean. One cracked plastic on left, only noticed it today but i will look at creating a new set. Small crack in left ramp near opening behind cliffy.
I have replaced three other plastics with repros. - done by me. Unless you know you wouldn't know, if you know what I mean... They are pretty good. I have photoshoped and had professionally printed plastics for others on here
Need a few more pics, let me know.
Thanks
John
looking to make space for the Video Cab of my dreams; a Starwars Upright.
£3650. If you have a Star wars Upright (project / working) for trade we can also talk
If you have been round mine during the Midlands meet or NLP last year, chances are you have played my Iron Man. It did have a knackered right ramp. It now has a brand new right hand ramp
Both ramps are now fitted with Cliffeys.
The legs side rails and lock down are a metallic Iron Man colour (automotive not powder coat) that really makes the machine look like the dogs danglly bits.
I have cliffies on the shooter lane, iron man badges in the speaker grills.
It has a shaker motor.
Mirrored blades inside.
It has LEDs, don't know what sort.
It will also come with a complete set of playfield / ramp decals. I bought them for the three ramp decals i thought i may need for replacing the ramp. Turned out that i managed to get the old ones off with the Mrs hair dryer and onto the new one - no loss of sticky
Factory Mylar around bumpers, and i added mylar circles around the magnets.
I will also sling in an original Iron Man manual.
Some scuffs and scrapes here and there. Playfield could do with a bit of a clean. One cracked plastic on left, only noticed it today but i will look at creating a new set. Small crack in left ramp near opening behind cliffy.
I have replaced three other plastics with repros. - done by me. Unless you know you wouldn't know, if you know what I mean...
They are pretty good. I have photoshoped and had professionally printed plastics for others on here Need a few more pics, let me know.
Thanks
John
John is good people so buy with confidence 
