I need a cable making please….

[Andydn]

Is there anyone that can make up 3 of these cables for me at please?
The yellow connector plugs into the power board on Spike 2 Sterns (12v), the inline fuse is 2 amp and a female molex connector on the end. Looks easy enough if you have the bits & the know how.

Give me a shout if you can help at all, it’s the fuse & molex but I’m not sure about myself.
Cheers
Andy

(It’s to run under cab lighting, kits come with 2 led strips but one is bright enough, bought 3 kits so need another 3 cables.)

 

[Bobbdobalina]

I sent my afm saucer cable to Jim @myPinballs , and he made a quality replacement .

 

[Fubar]

If you have an IDC punch tool and some 3-pin connectors (as used for WPC games) you could directly attach that to the strip & get rid of the molex. Solder an inline fuse, bit of heatshrink, job done!

 

[Andydn]

If you have an IDC punch tool and some 3-pin connectors (as used for WPC games) you could directly attach that to the strip & get rid of the molex. Solder an inline fuse, bit of heatshrink, job done!

Cheers, I’ve had a PM & looks like someone’s making them for me. I need the molex connector so pretty much want it to be the same as the one pictured.