Hi i am looking for the plunger assembly for my Goldeneye pinball satellite lift ramp. Part number is 515-6493-00 which includes the plunger, link and roll pin. Even if you just have the link which is part number 535-7671-00 that could be fitted as the plunger is still intact.
Plunger itself length is 2 and 1/8" long. The broken fibre link ( glued together in the photos ) is 1 and 1/8" long , 1/2" wide with a hole 1/4" diameter for the pivot.
Anyone selling one of these i`d happily buy it. Any information regarding sellers of the part would be greatly appreciated. I have spent quite a while trawling the internet without success !
Thanks in advance,
John Beveridge.
Plunger itself length is 2 and 1/8" long. The broken fibre link ( glued together in the photos ) is 1 and 1/8" long , 1/2" wide with a hole 1/4" diameter for the pivot.
Anyone selling one of these i`d happily buy it. Any information regarding sellers of the part would be greatly appreciated. I have spent quite a while trawling the internet without success !
Thanks in advance,
John Beveridge.
Attachments
Last edited: