What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Sold Foo Fighters Premium HUO £6995

Jib

Site Supporter
Joined
Mar 12, 2021
Messages
1,533
Location
Northamptonshire
Foo Fighters Premium HUO £6995
  • 507 Lifetime plays (will continue to increase)
  • Stern cabinet expression lighting system
  • Stern side armour
  • 5.25” JBL backbox speakers, upgraded plates and red inserts
  • Col’s plastic protectors and etched ramp plastics
  • Invisiglass - has a very tiny defect, like a small bubble. I can swap out for a new standard piece once incoming NIB arrives if preferred
  • New upgraded stern flipper bushings on 3 main playfield flippers (if you do a factory reset I recommend turning the flipper power down)
  • Mix of Titan and standard black rubbers
  • Mylar added around drop target playfield edge, upper playfield drop edge and shooter lane exit extension area
  • Tiny nick in side cabinet decal (see photo)
  • Lockdown bar has 6 tiny dimples that can be seen in a certain light and angle. Powdercoat is not chipped or scratched (see photo). Not sure what these are from. It’s really not very noticeable imo but you can buy a new lockbar for about £100 if it bothers you
If you have any questions or want more photos just let me know. Happy for you to view and collect yourself or use Martin or Matt, both have been here before. Payment via bank transfer only.
 

Attachments

  • 1.webp
    1.webp
    129.8 KB · Views: 255
  • 2.webp
    2.webp
    183.9 KB · Views: 265
  • 3.webp
    3.webp
    265.1 KB · Views: 239
  • 4.webp
    4.webp
    101.1 KB · Views: 230
  • 5.webp
    5.webp
    247.3 KB · Views: 223
  • 6.webp
    6.webp
    98 KB · Views: 227
  • 7.webp
    7.webp
    217.4 KB · Views: 218
  • 8.webp
    8.webp
    213.9 KB · Views: 215
  • 9.webp
    9.webp
    274.2 KB · Views: 199
  • 10.webp
    10.webp
    271.6 KB · Views: 193
  • 11.webp
    11.webp
    305.8 KB · Views: 182
  • 12.webp
    12.webp
    344 KB · Views: 168
  • 12b.webp
    12b.webp
    336.7 KB · Views: 166
  • 13.webp
    13.webp
    312.5 KB · Views: 157
  • 14.webp
    14.webp
    261.5 KB · Views: 155
  • 15.webp
    15.webp
    167.5 KB · Views: 146
  • 16.webp
    16.webp
    230.5 KB · Views: 146
  • 17.webp
    17.webp
    229.7 KB · Views: 140
  • 18.webp
    18.webp
    144.7 KB · Views: 134
  • 19.webp
    19.webp
    211.3 KB · Views: 134
  • 20.webp
    20.webp
    135.8 KB · Views: 127
  • 21.webp
    21.webp
    136.2 KB · Views: 116
  • 22.webp
    22.webp
    44.9 KB · Views: 107
  • 23.webp
    23.webp
    150.7 KB · Views: 107
  • 24.webp
    24.webp
    126.4 KB · Views: 105
  • 25.webp
    25.webp
    77.1 KB · Views: 110
  • 27.webp
    27.webp
    267.1 KB · Views: 118
  • 28.webp
    28.webp
    259.3 KB · Views: 127
  • 29.webp
    29.webp
    183.5 KB · Views: 217
  • 26.webp
    26.webp
    186.7 KB · Views: 86
Last edited:
Lockdown bar has 6 tiny dimples that can be seen in a certain light and angle. Powdercoat is not chipped or scratched (see photo). Not sure what these are from. It’s really not very noticeable imo but you can buy a new lockbar for about £100 if it bothers you
They are where the top of the lockdown is riveted to the bottom piece - exists on most lockdown bars, however is more obvious on some than others.

Lovely machine!
 
  • Like
Reactions: Jib
They are where the top of the lockdown is riveted to the bottom piece - exists on most lockdown bars, however is more obvious on some than others.

Lovely machine!
Thanks. The powder coat is a little smoother than most wrinkle black sterns so probably why you can see it more.
 
I was going to keep this for a bit longer after previous sale fell through but I put another 40-50 games on it over the week and decided it's time for it to leave.

I have a nib incoming and would need to wait for that to arrive to swap out the invisiglass or you can have the invisiglass with a tiny bubble defect if you prefer.

Any questions just message me here or whatsapp if you have my number.
 
Last edited:
Price reduced to £7500

Also updated the original post with current lifetime plays and the option to keep the sheet of invisiglass with a tiny bubble in it which would make the machine ready to pick up now vs waiting for my new machine to arrive.
 
Martin due to pick up another machine this afternoon.

If someone wants this taking today and can pay before noon I can probably get this wrapped up in time if Martin has space for one more.
 
Last edited:
Back
Top Bottom