Folding the addams backbox

[HomerRamone]

Do i need to disconnect anything to fold it down?
It's not going anywhere just need to fold to make room enough to get in where its at iyawim

 

[strobey]

Nope, just unlatch and fold down. Best to support both side of the backbox to prevent twisting.

There might be a locking bolt (or two) which is accessible by removing translite and speaker panel.

 

[Marvello]

Just be careful you don't trap any cables when you fold it back up.

 

[ronsplooter]

Try and go easy when folding it down as well and keep an eye on the cables to make sure nothing gets pulled too tight

 

[drhex]

Put something between the box and siderails to prevent dents. If you dont have the wingbolts in the backbox get and use them. Not pretty if the backbox falls over, especially if someone has their hand in between.

 

[HomerRamone]

Thanks for all the feedback folks. Appreciated.

 

[Tucks]

There's also 2 bolts in the bottom of the backbox attaching it to the main cab which will need to be removed first.

As above, feed the cables through when folding so they don't become too tight.