Flipper angle adjustment

[CLDOGGSON]

One of my flippers on my Stern James Bond (Pro) is slightly obtuse making it so the ball doesn't roll to the back of the flipper when I want to cradle it. Does anyone know how I could adjust the angle of the flipper to fix this issue or be able to direct me to a guide on how to do so?

 

[drhex]

Tilt up the playfield and lok at the flipper mech. There is a nut tightening a clamp round the flipper shaft. Loosen, adjust so the flipper points at the hole in the playfield, make sure you have about 1mm up down play and tighten again.