Family Guy Play field Insert Decal B of 'PINBALL'

[Biff]

Hi

The B in the row of playfiled lights that spell pinball is damaged, and i need to do a repair.

Anyone got this decal, or have an image of this decal or has the machine that they can scan the pinball lights for me so i can do the rest?

IPDB do have one, but it is at an angle: -

http://www.ipdb.org/showpic.pl?id=5219&picno=33625

Will use bits of this if I have to.

Cheers all.

JB

 

[dave]

What's the size of the lamp insert, 26 28?

If you can tell me that I could reproduce it for you to print off at correct size.

 

[Biff]

Hi that's great news thank you!

I managed to get a butchered flat bed scanner in on the top of the table and got a scan of the B decal.
I then restored in Photoshop - see attached tiff.
The bumpy bits were missing on the right, so touched em back up with my trusty bamboo pad - see b4 JPg for what it looked like

If you are able to print off and cutt, that would be great. I was going to remove the rest of the decal, then waterside the new decal in place, and layer up around the edge with black, before putting a rectangular strip of Mylar over all of the decals in that area.

The actual decal diameter is 18mm
The height of the B is 12mm
The black circumference over print is as usual off centre, so was going to do that manually.

If those dimension are adhered to, i will be able to slide it in place and the letter will be in proportion with others.

Don't worry of this is a problem, will also check my printer mate who has a laser cutter that will cut to what ever circle dimension i need. It was him who sorted my Photoshoped decals for my Zac Circus.

The only concern i have, is matching the slightly off white colour with the other remaining decals.

System wont let me upload a tif! So saved as JPG. But if you can help, PM me and will email the tif to you as it contains the transparency.

Cheers

JB

 

[dave]

Seem to have wires crossed a bit here. I was just going to redraw the B from references for you as I didn't think you were able to do that (scan & touch up)

I wanted the size so I could send it back to you so you could print it off yourself.

Doesn't look that it's that far out with your "b4 copy"

 

[Biff]

Hi no problem, no one replied so i went to plan B

Thanks though.

JB

 

[Poibug]

worth the effort,great game,had mine a few years now,plus if bored load in the shrek software for summat different!

 

[JR1]

Hi that's great news thank you!

I managed to get a butchered flat bed scanner in on the top of the table and got a scan of the B decal.
I then restored in Photoshop - see attached tiff.
The bumpy bits were missing on the right, so touched em back up with my trusty bamboo pad - see b4 JPg for what it looked like

If you are able to print off and cutt, that would be great. I was going to remove the rest of the decal, then waterside the new decal in place, and layer up around the edge with black, before putting a rectangular strip of Mylar over all of the decals in that area.

The actual decal diameter is 18mm
The height of the B is 12mm
The black circumference over print is as usual off centre, so was going to do that manually.

If those dimension are adhered to, i will be able to slide it in place and the letter will be in proportion with others.

Don't worry of this is a problem, will also check my printer mate who has a laser cutter that will cut to what ever circle dimension i need. It was him who sorted my Photoshoped decals for my Zac Circus.

The only concern i have, is matching the slightly off white colour with the other remaining decals.

System wont let me upload a tif! So saved as JPG. But if you can help, PM me and will email the tif to you as it contains the transparency.

Cheers

JB

HI Biff,

HOW DID IT TURN OUT? I HAVE THE SAME PROBLEM. CAN YOU UPLOAD A PICTURE? ALSO, WHAT COLOR IS THE WHITE?
THANKS, jr

 

[Biff]

Turned out pretty good. I just touched it up in the end and the placed some mylar over the top. Cant tell now.