Wanted Family Guy Plastic & Decals

[MartinY]

Looking for the following bits and bobs for Family Guy if anyone has them (or can point me to the best place to get them):
- Stewie plastic (captive ball cover)
- Monkey ramp cover decal
- Patriot Ale / Patriot Root Beer decal

Thanks in advance!

 

[chris b]

ph has the can decal
captive ball plastic always smashed

 

[J.C.Rox]

Marcos have the full set if you're prepared to pay https://www.marcospecialties.com/pinball-parts/803-5000-93

 

[Pinoffski]

PinballLife has plastics and decals
scroll down to view
https://www.pinballlife.com/index.php?p=catalog&parent=174&pg=1

 

[Pick Holder]

Pinballcenter do a mini plastic set.

My Family guy is going tomorrow.

http://www.pinball.center/en/shop/p...astics/7689/plastic-set-for-family-guy?c=2298

 

[Pick Holder]

.... oh plus Stern are also helpful. Phil Palmer got me a new monkey ramp easily!

 

[MartinY]

Pinballcenter do a mini plastic set.

My Family guy is going tomorrow.

http://www.pinball.center/en/shop/p...astics/7689/plastic-set-for-family-guy?c=2298

I think I'm going to get this mini plastic set - they do the Fish Tales overlay as well. I've just got a niggle in the back of my mind that Pinball Center aren't the best quality for this stuff? I'll give it a go in a few days...

 

[Pick Holder]

The plastic set is fine. I purchased one.

I do agree. A lot of stuff is not good quality.

 

[J.C.Rox]

The plastic set is fine. I purchased one.

I do agree. A lot of stuff is not good quality.

Wish I'd seen that before I spunked hundreds at Marcos!

 

[Sgt GrizZ]

The plastic set is fine. I purchased one.

I do agree. A lot of stuff is not good quality.

Some Pinball Centre stuff is atrocious. I have sent stuff back in the past and wouldn't use them again.

Someone told me they have no license for any of the stuff, and 'the man' is closing in on them. Don't know about that.... but in my experience they sell some right shonky repros.

Sent from my D5833 using Tapatalk

 

[Mercifull]

Quality of the plastic from Pinballcenter is great... the quality of the printing, not so much. It's a bit blotchy/pixelly.

 

[Pick Holder]

Well - I bought some, and was happy. So is the current owner.