I got a bit sick of changing jumpers on MPU and soundboards, for when you blow some new roms.
Many older SS boards use 2532 as std, these are impossible to find at a decent price (or are all fake/duds) and so we tend to use 2732 which have a different pinout.
Rather than f*****g about with you board, I found one of these, and it worked, so decided to make a few extra:
It takes a 2732 EPROM Chip and converts the pins to enable it to be plugged straight into a board socket that is configured for a 2532.
(You can also wire it the other way round, by swapping the pins and the socket, so that a 2532 eprom/rom can be plugged into a board socket that is wired for a 2732).
£6.99 each UK Posted - fully soldered up. Can provide in kit form if you want to do it yourself for £4.99.
Many older SS boards use 2532 as std, these are impossible to find at a decent price (or are all fake/duds) and so we tend to use 2732 which have a different pinout.
Rather than f*****g about with you board, I found one of these, and it worked, so decided to make a few extra:
It takes a 2732 EPROM Chip and converts the pins to enable it to be plugged straight into a board socket that is configured for a 2532.
(You can also wire it the other way round, by swapping the pins and the socket, so that a 2532 eprom/rom can be plugged into a board socket that is wired for a 2732).
£6.99 each UK Posted - fully soldered up. Can provide in kit form if you want to do it yourself for £4.99.
