I’m beginning to think it might have been easier to do jobs for her indoors than buy an EM project.
Ok I’ve cleaned the stepper assemblies in the backbox and double checked I’ve put them back together correct.
Now after connecting up the cab plugs to the backbox and switching on all that happens is the lock relay pull in and the GI lights are lit.
Dropping a coin thru either coin switch does nothing (neither does moving the lever with my finger). If I put credits up manually on the credit wheel and press start bugger all happens. I have 55v across all 3 terminals on one coin switch and 55v across 2 terminals on the other switch.
There are around 15 relays all in a row along the bottom of the cabinet that I’ve cleaned all the switches on. The score reels are all set to zero after I’d cleaned them and reinstalled them. Help !!! Ken
Ok I’ve cleaned the stepper assemblies in the backbox and double checked I’ve put them back together correct.
Now after connecting up the cab plugs to the backbox and switching on all that happens is the lock relay pull in and the GI lights are lit.
Dropping a coin thru either coin switch does nothing (neither does moving the lever with my finger). If I put credits up manually on the credit wheel and press start bugger all happens. I have 55v across all 3 terminals on one coin switch and 55v across 2 terminals on the other switch.
There are around 15 relays all in a row along the bottom of the cabinet that I’ve cleaned all the switches on. The score reels are all set to zero after I’d cleaned them and reinstalled them. Help !!! Ken