Elektra Shopping List - Daft questions

[TonySchwager]

Hi all daft questions from me ( I was scared of changing a bulb a couple of months ago)

I will start a shop log once I have got a bit further and probably be asking more
I have stripped down Elektra and ordered some PIMP stencils, stated the filling and sanding

I want to rebuild the 4 main flippers and get some new cab switches am i right that I need

From Pinball Mania

Switches

3 x SW-10A-48 Single Cabinet Flipper Switch

Flippers
2 x Flipper Rebuild Kit linear - Bally Rolling Stones - 11/88 BFLIP04
Plus 2x additional leaf for front flippers ASW-A20-23

The Earth braiding is pretty shredded in places so to replace
Earth Braiding 30A

And finally in the back box there is some silver lined cardboard stuff which could do with a change anywhere you can get that?
Thanks all

 

[astyy]

The Earth braiding is pretty shredded in places so to replace
Earth Braiding 30A

Braid from here, comes in rolls enough for a couple of machines
https://www.rapidonline.com/cables-connectors/flat-braid-flb-2-5-36-25m-reel-03-1926

 

[TonySchwager]

Braid from here, comes in rolls enough for a couple of machines
https://www.rapidonline.com/cables-connectors/flat-braid-flb-2-5-36-25m-reel-03-1926

Thanks , used that website a couple of weeks ago by coincidence

 

[DRD]

Elektra - well done for renovating one of these. Classic Bally, just before the cost cutting. Many happy memories of playing this in the early 80s

 

[TonySchwager]

Found this so parts ordered - hope i got it right
http://howtopinball.com/files/pinba...c/parts-catalogs/Bally-Parts-Catalog-1982.pdf

 

[Solar Sailer]

I bottled out of the Stencil Kit! Will be interested in the shop log Tony.
Told you you will end up tinkering!