What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Eddy sensor help

Spandangler

Site Supporter
10 Years
Joined
Jul 21, 2011
Messages
6,764
Location
Suffolk
Hi group,
I noticed today the right return lane eddy sensor on my STTNG wasn't registering, so I did the normal tweaking but this time the led wouldn't go off. So i unplugged the connectors and reconnected them and now the led wont come on!
So I tried swapping the board from the left hand side, which didn't work either and now that one won't work either on the left! With me :-)

So is it possible the sensor itself is faulty and destroying the boards? My knowledge is limited on these. Is it time to buy new sensors and boards both sides?

Any help gratefully received as always!

Regards
Gaz
 
Eddy sensor

It sounds like you over adjusted the first time u need to roll a ball over sensor as you adjust,as for not coming back on ...... Have tried re adjusting it and have you go connections in correct place I can look at mine to check if ya want:thumb:
 
Cheers Dave,
I'll try readjusting whilst rolling the ball over but no matter how much I turn the screw the led doesn't come on at all. As soon as I unplug the sensor plug the led comes on!
im sure its connected correctly, it's only 2 plugs unless I've put them on back to front but I don't think I have.
Ill have another tinker tomorrow.
thanks mate

gaz
 
Back
Top Bottom