Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
In Progress Earth Wind and Fire Pinball - Not the POP Group silly
- Thread starter Mozcom
- Start date
OP
OP
[emoji22]
OP
OP
Cheer's Kev. Maybe I'll play this better than TOTAN that we played last year. Lol
Yeah haha!!!!
OP
OP
Well the cab's at the carpenters with ball park figure to save as much of the artwork as possible. Contact made with others for repairing and testing the boards.
Was hoping that I'd get my tumbler for my BD as I normally don't ask for anything, alas not, but it'll be on order soon.
After working 20 days without a day off, now watching the rugby with a large glass of wine [emoji39]
Was hoping that I'd get my tumbler for my BD as I normally don't ask for anything, alas not, but it'll be on order soon.
After working 20 days without a day off, now watching the rugby with a large glass of wine [emoji39]
OP
OP
I must be MAD!! It's all yours fault @newdos & @Nedreud.....2 N's... 2 Nutters I think.
Well here it is again
http://uploads.tapatalk-cdn.com/20160208
/b8cbd5f276d5091fa2f779edaf522a1f.jpg
I thought it best to label up before I did anything.
As this my first and don't have a great idea what I'm doing as there's no HAYNES manual for this
Tumbler purchased Saturday after BD, so should be with me tomorrow[emoji3] so I can get on with this lot and not loose myself in putting the thing back together, bit by bit.
I know I might be flogging a dead horse but we all end up in different sized boxes any way in the end. At least I've tried to give this another life?
Well here it is again
http://uploads.tapatalk-cdn.com/20160208
/b8cbd5f276d5091fa2f779edaf522a1f.jpg
I thought it best to label up before I did anything.
As this my first and don't have a great idea what I'm doing as there's no HAYNES manual for this
Tumbler purchased Saturday after BD, so should be with me tomorrow[emoji3] so I can get on with this lot and not loose myself in putting the thing back together, bit by bit.
I know I might be flogging a dead horse but we all end up in different sized boxes any way in the end. At least I've tried to give this another life?
That will come up great man just keep going!!!
Cheers Kev
Cheers Kev
OP
OP
OP
OP
Well the present to myself finally arrived
I did forget to get the walnut media though. Doh. Any recommendations as to where from and what grade?
Anyway, thought I'd set it off with what came with it and some autosol and see what happens[emoji4]
Back soon.
I did forget to get the walnut media though. Doh. Any recommendations as to where from and what grade?
Anyway, thought I'd set it off with what came with it and some autosol and see what happens[emoji4]
Back soon.
I buy mine as reptile substrate from the petshop - same stuff but much cheaper!!
Cheers Kev
Cheers Kev
OP
OP
Direct or from Amazon Kev?
OP
OP
Sorry long day. Didn't read it properly. Doh
OP
OP
Think I might need a lhs slingshot arm for starters John if possible?
I'll pm you also
Sorry everything has been stripped from the playfield but I'll look through the boxes to see if there's one in there. Be patient with me.... not sorted any boxes yet following the house move.
OP
OP
No worries J. Knew this was going to be a long shot
You'll want some corncob as well, for the second stage of polishing. The wallnut is mainly for getting the rust off
http://www.petsathome.com/shop/en/pets/prorep-corn-cob-granules-(online-only)
OP
OP
Any preference to ProRep or Eden? Also grit or sand? How long do you tend to leave it for?
Cheers
Mike
Cheers
Mike
I use wallnut grit until the rust and major scratches are gone, can take a few hours, the only way to check is to visually inspect the condition every hour or 2 really.
Next corncob goes in (add a couple of squirts of novus 2) and then leave everything in until it is polished shiney. It can take a few hours to a couple of days depending on how nice you want it to look.
You can of course re-use the grit and corncob a few times so you'll probably want to store them in a container inbetween changes.
Next corncob goes in (add a couple of squirts of novus 2) and then leave everything in until it is polished shiney. It can take a few hours to a couple of days depending on how nice you want it to look.
You can of course re-use the grit and corncob a few times so you'll probably want to store them in a container inbetween changes.
OP
OP
I have thanks. Mine is not that bad and I'm concentrating on getting what I can do with my ability/disability (lol) first as it's a non worker at the mo, but I'm sure it will be a good looking non worker when done. [emoji19]
OP
OP
Supposed when it's finished, I could always stick it on the Bay as only needing "A fuse".[emoji20]
But that wouldn't be Cricket would it!!!!
Glad I could help! Don't know what you're worried about? That playfield looks mint. Probably just needs a fuse and some new rubbers
OP
OP
Glad to see you back. Hibernation?
Well got all the gear- no idea [emoji19]
A
Meth lab arriving tomoz I hope, then I can give the rusty stuff some grieve[emoji41]
Well got all the gear- no idea [emoji19]
A
Meth lab arriving tomoz I hope, then I can give the rusty stuff some grieve[emoji41]
OP
OP
Meth lab arrived.
Lamp holders before phosphoric bath
20 mins after
Now in the tumbler
Pity it's not like Blue Peter - Here's some I prepared earlier. [emoji19]
Lamp holders before phosphoric bath
20 mins after
Now in the tumbler
Pity it's not like Blue Peter - Here's some I prepared earlier. [emoji19]
OP
OP
I don't believe it. I love my tumbler!
Can't find enough to throw in it.
Thought I'd stick the lamps in for a laugh.
With these results and I haven't even polished them with the corncob yet
[emoji2]
Can't find enough to throw in it.
Thought I'd stick the lamps in for a laugh.
With these results and I haven't even polished them with the corncob yet
[emoji2]
OP
OP
Well I'm certainly not as quick as others but quite happy with my first biggest test.
First strip clean and build of the drop target. Glad I took so many photos. Thought I might have a few screws left but no, it all went back together again.
Before pics...
After...
[emoji4]
First strip clean and build of the drop target. Glad I took so many photos. Thought I might have a few screws left but no, it all went back together again.
Before pics...
After...
[emoji4]
Liking that Might have to look at picking up one of those kits!!
Might have to look at picking up one of those kits!!
OP
OP
It's not zinc plating @Paul if you thought it was sorry. Tumbler, drill with polishing wheel and time.Liking that
Told you that phosphoric acid is good stuff!!!!Meth lab arrived.
Lamp holders before phosphoric bath
20 mins after
Now in the tumbler
Pity it's not like Blue Peter - Here's some I prepared earlier. [emoji19]
Cheers Kev
