Driver board connectors

[Steve Arnold]

Hi all, can someone tell me the name of the connectors that you can use on a wpc89 power board to piggyback power for my pin2dmd display. It’s had to describe what I’m talking about so sorry for vauge description.

Thanks
Steve

 

[BigIan]

A Z connector you mean ?

kinda like this

 

[Steve Arnold]

That’s what I need.
Thanks for that.

Steve

 

[Steve Arnold]

Yes that’s what I need. Can’t find them anywhere.
Any idea of a link to one please?
Trying to fit a colour pin2dmd properly and not bodge it like I have for now.

Thanks
Steve

 

[Pick Holder]

I personally wouldnt run pun2dmd off a williams game 5v. Always use the 12v or a power supply.

 

[Paul]

Molex Z Connector, male/male, 6 Pin, 0.156"

www.pinball.center

4-Pin Male/Male "Z" Connector

4-pin male/male "Z" connector for solid state electronic pinball machines, compatible with Data East, Sega, and Stern. Features high-temperature resistance with a black color. Ideal for Williams #5791-12235-04.

www.pinballlife.com

5791-12235-06 - Connector - 6h special *Z* .156 inch - Marco Specialties Pinball Parts

6h special *Z* .156 inch

www.marcospecialties.com

 

[Steve Arnold]

Thanks guys.

Where is the best place to get the 12v from then on a Williams fish tale?
I have used j140 for scared stiff as it’s 12v.

Pin2dmd says j116/117/118 that’s 12v. Ok to use those terminals?